Get or give advice on equipment, reloading and other technical issues.
Moderator: Mod
lapua scenar 155g
Replies: 5
by
fclassNrugby »
Mon Nov 25, 2024 6:49 am
First post
Doing load development on 308 155 lapua scenar with 2208. Lapua palma brass CCI primer.
Any tips or load data anyone cares to share?
Last post
OK my rifle likes 0 tho and 30 tho, so either in the Lans/lands/lanse.......... or a bit of a jump.
5 Replies
1820 Views
Last post by fclassNrugby
Mon Dec 02, 2024 5:47 am
Aiming marks and target centers
Replies: 2
by
gregor »
Sun Nov 10, 2024 1:16 pm
First post
Seems that these are hard to come by at assoc shops. Who or where are you clubs getting them from please?
Last post
Have had no problems getting them from the SARA shop.
Richard
2 Replies
1457 Views
Last post by Ras
Mon Nov 11, 2024 8:42 am
Any Experience with Bertram .284W brass?
Replies: 4
by
CamoWhamo »
Sat Oct 05, 2024 2:48 pm
Rating: 0.99%
First post
Has anyone used Bertram brass in .284W.
Just wondering how it rates in terms of consistency and durability.
Thanks
Last post
I have used Bertram .284 brass when I couldn't acquire Lapua or Norma. Weighed them, neck trimmed and sorted them and had no problems at all.
4 Replies
1971 Views
Last post by Rob Coombs
Mon Nov 04, 2024 2:23 pm
Pxl rest questions
by
2fore3cal »
Wed Oct 30, 2024 9:26 am
G'day all. Just found PXL precision rests looking for opinions from anyone who has 1st hand experience with them. They seem like a good example....
0 Replies
1254 Views
Last post by 2fore3cal
Wed Oct 30, 2024 9:26 am
7w/6.5 load
Replies: 39
by
heritage5 »
Tue Jan 09, 2024 5:36 pm
Rating: 12.91%
First post
Hi all I have a necked up 6.5 prc to 7mm trying to get 180 hybrid target to shoot I am at 60.5 of 2217 2950 fps but am struggling to get them to...
Last post
Nah I don't like doing that. It brings other issues that I don't want to deal with. Just like the guy who not to long ago here burned up a 300RUM...
39 Replies
22460 Views
Last post by Frank Green
Tue Oct 29, 2024 12:56 am
Rifle 'scope Storage
Replies: 2
by
Nick@2340 »
Mon Oct 28, 2024 10:25 am
First post
Recently I needed to have two rifle telescopes serviced by a reputable manufacturer for a couple of reasons.
I wasn't expecting to know if there was...
Last post
What is a rifle telescope?
2 Replies
1466 Views
Last post by Mick S
Mon Oct 28, 2024 9:11 pm
Many, many F Class Questions
Replies: 10
by
Tsv900 »
Sat Oct 26, 2024 9:32 am
First post
Hey all,
I have a Tikka T3X Super Varmint in 6.5CM that I purchased in 2021, long before I knew what F Class was. Anyway, my local public range goes...
Last post
Sporter class the highest scoring ring is 5 and is approximately 2moa. The other f classes use the same target but utilise the inner ring which is 6...
10 Replies
2080 Views
Last post by BATattack
Mon Oct 28, 2024 9:32 am
F Open - plate under front rest
Replies: 10
by
ClintonAsh »
Mon Oct 21, 2024 4:45 pm
First post
Looking for ideas please . I shoot at a range with heavy pea gravel mounds and I'm trying to get some stability to the front rest . Spikes don't go...
Last post
Most people use something similar to these.
The spike / cone prevents lateral movement while the flared section prevents the rest settling...
10 Replies
1709 Views
Last post by BATattack
Wed Oct 23, 2024 12:23 pm
No such thing as a good seating die
Replies: 19
by
John Weigel »
Sun Oct 20, 2024 2:29 pm
First post
It is a source of ongoing frustration that despite the high level of precision that can be achieved in so many facets of loading prep, bullet-seating...
Last post
I always nudge mine in (as per Franks post), takes longer but means that variances (and there are a lot of small things that play into this) get...
19 Replies
2605 Views
Last post by wsftr
Wed Oct 23, 2024 9:41 am
Testing White River and OFV primers
Replies: 11
by
John Weigel »
Mon Apr 22, 2024 7:16 pm
Rating: 4.97%
First post
OK, straight up – this skinny data-set raises as may questions as it answers. But I figured it was worth sharing its rough-and-ready indications...
Last post
Anton
The primer pockets in my Lapua brass measures 0.128"~ 0.129" deep
Yes, the WR primers are larger than this dimension, but that...
11 Replies
7645 Views
Last post by PeteFox
Fri Oct 18, 2024 7:53 am
Swirling powder?
by
Tim L »
Mon Oct 07, 2024 9:04 pm
Just interested to hear opinions supporting or debunking the effect of swirling powder into the case.
Who makes an effort to do it and what that...
0 Replies
762 Views
Last post by Tim L
Mon Oct 07, 2024 9:04 pm
Supertrickler vs AutoTrickler v4 people opinions after a few years of use?
Replies: 10
by
F Class Ric »
Mon Aug 12, 2024 12:20 pm
Rating: 2.32%
First post
Hey fellow F Class shooters.
So after upgrading all my equipment of late I am still left using mechanical powder thrower and 0.02gn scales and a...
Last post
Hi I recently purchased a v4 / autotrickler from Kaizen tactical and could not be happier, simply calibrate with the phone apt and 99% of the time it...
10 Replies
4779 Views
Last post by heritage5
Sun Oct 06, 2024 8:13 am
Dyer HBC or Optimus HBC
Replies: 8
by
Ken Melgaard »
Wed Aug 28, 2024 1:38 pm
Rating: 0.99%
First post
Just looking for some info on the Dyer or Optimus HBC bullets if anyone has some they could measure for me please
The info that l am wanting, is the...
Last post
Taipan stuff all got ditched to a big hole in the ground. Hbc closed up believe David Gifford has relocated to Texas and is making other projectiles...
8 Replies
5343 Views
Last post by ErrolW
Sat Oct 05, 2024 9:38 pm
Barnard P bolt question
Replies: 1
by
alscol71 »
Sat Oct 05, 2024 4:16 pm
First post
Can a non ejector Barnard Bolt be converted to have an ejector?
Last post
Yes, dependent on state by someone who is licensed and proficient.
1 Replies
638 Views
Last post by MacP
Sat Oct 05, 2024 4:32 pm
Barnard P spare parts - what's in demand?
Replies: 3
by
Aubrey »
Thu Oct 03, 2024 6:47 pm
Rating: 1.32%
First post
Screen Shot 2024-10-03 at 6.47.14 pm.png As you know we are running extractors and have modelled up bolt handles and bolt caps.
What else is in...
Last post
I hope someone out there can include parts for Barnard S: firing pins and springs.
3 Replies
1487 Views
Last post by Bobcat
Fri Oct 04, 2024 7:12 pm
Importing Dima stocks?
Replies: 16
by
BATattack »
Tue Mar 05, 2024 6:00 am
Rating: 2.65%
First post
Has anyone imported a Dima stock recently? If so what was the process? PM me if you prefer.
Last post
That is exactly what Border Force told me when I posed the question this September while sorting out a B709 import.
I was told that a B709 was only...
16 Replies
9491 Views
Last post by Fire Dog
Thu Oct 03, 2024 2:12 pm
Silver Mountain Targets
Replies: 3
by
Potshot2023 »
Tue Oct 01, 2024 5:53 pm
Rating: 0.99%
First post
Is there any truth in the news that Silver Mountain Canada has ceased production of new targets?
Last post
Daniel has stepped away from operations in Canada. The SMT Europe business in Germany is still in operation and will continue to supply parts and...
3 Replies
1338 Views
Last post by Aubrey
Wed Oct 02, 2024 5:31 pm
ADI BTI power
Replies: 3
by
BATattack »
Sun Sep 29, 2024 8:00 pm
First post
So it's been around for a while now. Other than velocity variations has anyone really found it to be any different with regards to temp stability and...
Last post
Just wipes off or fire one shot and all gone that was 2208 and have found the same with 2209
3 Replies
1302 Views
Last post by dazza284
Tue Oct 01, 2024 3:02 pm
Ingenuity Precision
Replies: 7
by
Pablolig »
Tue Sep 24, 2024 7:39 pm
Rating: 1.32%
First post
Hi Guys,
Does anyone have an update on the Ingenuity Precision powder dispenser?
Thanks.
Last post
An update: I spoke with Paul over the weekend. He has 1700 pre orders....I'm securing early shipping for those that preordered through me. After that...
7 Replies
1922 Views
Last post by Aubrey
Tue Oct 01, 2024 1:19 pm
HIGHER SCOPE MAOUNTS
Replies: 3
by
superx10 »
Fri Sep 27, 2024 1:24 pm
First post
Hi I have had to get a higher set of scope mounts by 9 or 10 mm can someone tell me the expected height difference from range elevations settings....
Last post
What ballistic calculator are you using @superx10 ?
Just change scope height in settings and then true.
3 Replies
1382 Views
Last post by MarkS
Sun Sep 29, 2024 10:03 am
Longest barrel on an Impact Precision 737R?
Replies: 6
by
GuyLuke »
Wed Sep 18, 2024 4:42 pm
Rating: 3.31%
First post
What would be the longest barrel you could put on an Impact Precision 737R action?
I've got a 6.5mm 31" heavy varmint profile Bartlein coming...
Last post
Depending on the action along with the barrel contour and weight... I'll put a bedding pad underneath the barrels breech end when bedding the action....
6 Replies
2101 Views
Last post by Frank Green
Tue Sep 24, 2024 1:21 am
6.5 Creedmoor 30" Barrel 140gr Berger 2209 Velocity
Replies: 7
by
ECKY »
Sat Sep 07, 2024 9:20 am
First post
Does anyone know what sort of velocity you can expect from a 6.5 creedmoor with a 30" barrel running 140gr Berger Hybrids with 2209. Lapua srp...
Last post
I agree. Biggest mistake I made when starting reloading was buying 500 gram and 1kg bottles of powder. Different batches always resulted in different...
7 Replies
3235 Views
Last post by ECKY
Mon Sep 23, 2024 5:26 am
FTR Barrel free bore
Replies: 6
by
Peterla »
Tue Sep 17, 2024 1:02 pm
First post
Hi all
What the freebore most of you use in a FTR setup to chamber Berger 180 to 200 projectiles
180 jugs and 200.20x are the 2 main projectiles that...
Last post
Throat diameter is slightly larger based on experimentation being done in LR BR, Fopen and PRC in respect to more
consistent velocities with slightly...
6 Replies
2162 Views
Last post by wsftr
Fri Sep 20, 2024 2:54 pm
180 vs 184 Berger
Replies: 3
by
Clyde »
Mon Sep 16, 2024 4:08 pm
Rating: 0.99%
First post
How many fps do you lose when going from a 180 to a 184 Berger using the same load?
Last post
Suspicion confirmed. Thank you
3 Replies
1894 Views
Last post by Clyde
Tue Sep 17, 2024 10:02 pm
Berger bullets in NSW
Replies: 6
by
esh2chan »
Wed Sep 11, 2024 2:26 pm
Rating: 0.33%
First post
Since BRT closed, how are you NSW residents sourcing Berger bullets?
Last post
Yep and even after the Aussie nut case went viral in NZ they can still import projectiles cases and mags without all the shit we put up with state to...
6 Replies
3400 Views
Last post by dazza284
Fri Sep 13, 2024 1:22 am
Coping with tinnitus
Replies: 9
by
superx10 »
Sat Sep 07, 2024 8:05 am
Rating: 3.97%
First post
Hi
Like many of our readers I have been shooting for a long time and subject to loud noises, this has resulted in a severe case of tinnitus. A...
Last post
Great advice majaci thanks.
9 Replies
3625 Views
Last post by superx10
Wed Sep 11, 2024 7:06 am
Scope leveling
Replies: 9
by
Tim L »
Sat Aug 24, 2024 11:44 am
Rating: 1.32%
First post
What level of accuracy is actually necessary, and how do we get it?
There are a few systems out there, but I am always left thinking there are a few...
Last post
Vertical line test, done once for the lifetime of that scope with bubble fitted and never removed again
9 Replies
5244 Views
Last post by majaci@bigpond.com
Tue Sep 03, 2024 6:14 pm
Replacement FP springs for Kelbly F-Class action
Replies: 1
by
wsftr »
Thu Aug 22, 2024 3:52 pm
Rating: 0.33%
First post
Hi,
I'm having trouble getting hold of quality replacement FP springs for Kelbly F-Class action.
Has anyone been down this track that can offer any...
Last post
Ziersch custom rifles. Send them and email of what you want and if they don't have it in stock they will put it in their next kelbly order.
I had a...
1 Replies
3322 Views
Last post by BATattack
Fri Aug 23, 2024 9:50 am
7MM/6.8WESTERN
Replies: 4
by
John T »
Tue Jul 02, 2024 8:00 pm
Rating: 0.33%
First post
Hello.
This topic may have been discussed previously, but has anyone developed and tested a 7mm wildcat of the 6.8 Western? (Rod, I will not believe...
Last post
Hello Frank.
I forgot that the 6.5 PRC is based on the 300 RCM. That case has very thin walls. This results in a powder chamber capacity which is...
4 Replies
4687 Views
Last post by John T
Thu Aug 22, 2024 6:30 pm
Small Rifle primers
Replies: 9
by
Ras »
Tue Aug 20, 2024 3:56 pm
Rating: 0.33%
First post
After having problems getting my normal Small Rifle Primers (CCI 400) I have managed getting some Remington No7 1/2 and some No 6 1/2 primers which...
Last post
Yep, I run a .223 with 80.5gn Bergers at 2988fps, with the Rem 7 1/2 or CCI BR4s for reference.
9 Replies
4615 Views
Last post by Weairy
Thu Aug 22, 2024 1:54 pm
SFP or FFP?
Replies: 4
by
drewdavis »
Thu Aug 15, 2024 1:32 pm
Rating: 0.66%
First post
Hi everyone. I'm setting up my first long range rifle and might want to try shooting an Fclass one day. From what I've read and what I feel works for...
Last post
SFP
The reticle stays the same size, the notches mean different things at different mags, but if you are shooting a known target like we do thats...
4 Replies
4093 Views
Last post by macguru
Tue Aug 20, 2024 2:57 pm
SAKO .308W Cases
Replies: 3
by
Walt »
Mon Jul 29, 2024 12:51 pm
Rating: 0.66%
First post
Can anyone tell me the actual, real case length of new, unprimed SAKO .308W cases, straight out of the pack? I am aware the specs say 2.015 inches...
Last post
Sako new unfired case length is 50.89mm - 50.95mm or 2.0035in- 2.0045in, 10 cases measured with a mitutoyo.
3 Replies
4173 Views
Last post by 6.5x55
Fri Aug 16, 2024 2:04 pm
Berger 200H .308 30" Barrel SRP Brass 2680 fps - is it too hot?
Replies: 4
by
wsftr »
Wed Aug 07, 2024 9:44 am
Rating: 1.32%
First post
Hi,
would an avg of 2670 - 2680 fps in a 30" Krieger Lapua SRP brass be pushing too much pressure?
Load looks nice but would it be too hard on...
Last post
Thanks - I'm using 2208, so nothing unusual there. Barrel is a Krieger .300/.308 10 tw so I don't expect that to create anything unusual pressure...
4 Replies
4240 Views
Last post by wsftr
Fri Aug 09, 2024 6:44 am
The deeper the rabbit hole, the...
Replies: 13
by
John Weigel »
Tue Jul 30, 2024 1:27 pm
Rating: 5.63%
First post
Just a couple of small observations around brass prep that recently surprised me - and may be of interest to one or two others. Firstly, after...
Last post
Thanks for your advice Keith, much appreciated.
Cheers Brad.
13 Replies
5472 Views
Last post by tom1
Thu Aug 01, 2024 3:29 pm
Powder Choice.
Replies: 1
by
Rwa198 »
Tue Jul 30, 2024 11:12 am
First post
Looking for the best powder for the following-
.223 Rem
24" Varmint Barrel
1:8" twist
ADI Case
Berger 80.5 Gn Fullbore target projectile...
Last post
First up, for those heavies get a 1-7 twist barrel.
With 80.5/85.5/88s both 2208 and 2206H work well.
Just use what you have/can get and what...
1 Replies
3940 Views
Last post by MarkS
Tue Jul 30, 2024 5:23 pm
CCI BR4 Primers
Replies: 22
by
loneranger »
Sun Jun 19, 2022 8:14 pm
Rating: 0.33%
First post
Has anyone been having issues with BR4 Primers ?
I have been experiencing more and more primers failing to fire from the same batch of primers. At...
Last post
Sorry CCI 450 Magnum Are the primers.
22 Replies
13367 Views
Last post by Chopper
Tue Jul 23, 2024 2:24 pm
Barnard bolt handle
Replies: 1
by
haemish762 »
Thu Jul 18, 2024 9:51 pm
First post
Hi all, could anyone tell me the thread for the Barnard P bolt handles that screw into the bolt body.
Last post
Hi Haemish
Barnard Bolt thread 3/8 24 TPI UNF
1 Replies
4159 Views
Last post by richmac
Fri Jul 19, 2024 10:19 am
223 Advice.
Replies: 6
by
tom1 »
Mon Jul 08, 2024 10:17 am
Rating: 2.32%
First post
We have a young bloke that is interested in coming down to our range to use his 223 in Sporter Class. It has a 21 inch barrel & I in 12 twist. He...
Last post
This morning our club shot at 300 yards. The young bloke showed up & we set him up for Sporter Class. First application he scored 38.1. He was...
6 Replies
4983 Views
Last post by tom1
Sun Jul 14, 2024 11:48 pm
Autodod question
Replies: 1
by
Rogue22 »
Fri Jul 12, 2024 8:38 pm
Rating: 0.66%
First post
I’m looking to start neck turning my cases for FTR, even with Lapua cases and running an undersize mandrel I seem to get 2 distinctly different...
Last post
Send me a PM mate…. Interested in helping.
1 Replies
4181 Views
Last post by jasmay
Fri Jul 12, 2024 10:09 pm
Sierra 2156 load infor
Replies: 2
by
theoldfart »
Mon Jul 08, 2024 10:36 pm
Rating: 1.99%
First post
Hi, relatively new to this forum and after over 30 years away from Target Rifle shooting, I have decided to have a crack at either FTR or F...
Last post
A word of warning about brass. Winchester cases are less uniform and have thinner walls than Lapua. Consequently they will have lower pressures with...
2 Replies
4267 Views
Last post by Blindbat
Tue Jul 09, 2024 1:10 am
7 SAUM Brass Prep
Replies: 6
by
AngryDropbear »
Thu Jul 04, 2024 1:35 pm
Rating: 0.66%
First post
Gday Guys,
Just got my Norma Brass for a new 7 saum brass. Intend to build a dummy round for the gunsmith to calculate free bore. Was thinking about...
Last post
No worries! Happy to help.
Also dont take my preference for Chamber Clearance ... Everyone has there own preference with clearance.
For the 7mm's...
6 Replies
4885 Views
Last post by JezL
Thu Jul 04, 2024 3:28 pm
0 Replies
3920 Views
Last post by saum2
Sun Jun 30, 2024 11:10 am
6 Dasher Brass Question
Replies: 6
by
Blindbat »
Tue May 07, 2024 12:15 pm
Rating: 1.99%
First post
Everything I have read about producing 6 Dasher brass involves starting with 6br cases and hydroforming, creating a false shoulder or the hillbilly...
Last post
I'd like to thank everyone for their advice. I have broken open more than one piggy bank and bought some Alpha brass. The thing I like about Lapua...
6 Replies
5699 Views
Last post by Blindbat
Fri Jun 28, 2024 6:22 pm
Lee Collet Die Small Decapping Pin
Replies: 6
by
tom1 »
Thu Apr 18, 2024 10:51 am
Rating: 1.66%
First post
Okay, I've just sold one kidney to buy some 308 Palma brass. I normally use a small base die & a Lee Collet die to prepare my 308 ADI or...
Last post
I ended up getting another Lee collet die. I put the mandrel in a drill & carefully filed the pin down, then tidied up with wet & dry. Works...
6 Replies
6084 Views
Last post by tom1
Thu Jun 20, 2024 3:32 pm
Neck tension (continued) and other considerations
Replies: 3
by
John Weigel »
Tue Jun 18, 2024 1:26 pm
Rating: 1.32%
First post
After the recent discussion about neck-lubes and neck tension issues, I decided to check my earlier conclusion that it doesn't make a lot of...
Last post
Its interesting as Erik C states that neck tension doesn't matter it just needs to be consistent. He consequently only makes two mandrel sizes.
So...
3 Replies
4940 Views
Last post by wsftr
Wed Jun 19, 2024 6:47 am
Neck seating lubrication advice
Replies: 17
by
fclassNrugby »
Fri Jun 14, 2024 7:42 am
Rating: 8.94%
First post
Hi All,
I am concerned that my neck tensions are not consistent and interested in finding ways to improve. I use a Redding collar neck sizing die...
Last post
Yes, and the problem is attributing an improvement or it's opposite to one factor, when it might be something else entirely.
The rabbit hole
17 Replies
8507 Views
Last post by PeteFox
Tue Jun 18, 2024 1:20 pm
Proof Research Stainless barrels
Replies: 3
by
Mick_762 »
Mon May 20, 2024 7:37 am
Rating: 0.66%
First post
Is there any knowledge on the Proof barrels?
I have been offered a 30” 1:7.5 6mm SS (non carbon wrapped) Med Palma profile - for a reasonable price....
Last post
Thanks mate, sorry for the delay in reply.
3 Replies
5108 Views
Last post by Mick_762
Sat Jun 15, 2024 1:59 pm
Sierra 2156 variants
Replies: 7
by
majaci@bigpond.com »
Fri Jun 07, 2024 7:08 pm
Rating: 0.66%
First post
Does anyone know for sure what is the difference between 2156, 2156B and 2156C?
Some say designation B and C are 'bulk' and 'carton' and some believe...
Last post
That's reassuring Geoff. Unfortunately I doubt if quality projectiles or lower grade projectiles would make a great deal of difference to my scores...
7 Replies
6083 Views
Last post by tom1
Mon Jun 10, 2024 9:05 pm
Myths and Mysticism in Load Development
Replies: 201
by
DingoDeerHunter »
Thu Jun 15, 2023 1:55 pm
Rating: 86.09%
First post
A mob called "Blackburn Defense" has started a YT channel delving into the issue of what testing can show results between performance of...
Last post
The tune window is the big one, but it's linked to OBT. The mass is doing 99% of the work. The micrometer adjustment of the tuner is probably more...
201 Replies
93866 Views
Last post by Drop shot
Fri Jun 07, 2024 6:36 am
Case Prep Station
Replies: 2
by
Mark De »
Tue Jun 04, 2024 12:02 pm
Rating: 0.66%
First post
Hi Chaps.
I am after a case preparation station.
I am open to recommendations.
Last post
Another vote for the RCBS, I got mine on special though,
I’d really like the hornady cast iron case prep centre or the Frankfort arsenal case prep,...
2 Replies
5153 Views
Last post by Rich4
Wed Jun 05, 2024 8:19 pm
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum