223 which barrel 1:7T or 1:8T

Ned · Post by **Ned** » Mon Feb 12, 2007 7:48 am

Hi everyone
I would like to know which barrel is best suited for shooting 80grn HPBT.
Has any body done any testing with these barrel twists, if so what were your resaults in FPS and what loads were used.

Thanks Ned

jcinsa · Post by **jcinsa** » Mon Feb 12, 2007 6:46 pm

Ned,
We use a 28 inch 1 in 8 twist barrel with 80 gn sierras, and as long as they leave the muzzle @ 2950 fps they are stable out to 1000 m.
We load 24+ grains of 2206H, but you would have to work a load up with your own rifle to be sure it's safe. We don't get very long case life.
Regards John

Chopper · Post by **Chopper** » Mon Feb 12, 2007 8:51 pm

stick with the 8 twist it will do the job very well as i have shot 6.5, 7.7 ,and 8 twist barrels at a 1000 and no differance was evident.

Ned · Post by **Ned** » Thu Feb 15, 2007 7:50 pm

Thanks for the input,much welcomed.
I did some testing at my local club, with a chrony last week and managed
2965 FPS, with MAB.223 barel, Lapua Match .223 cases, 25.0grn 2206H.
and 7 1/2 remington primers. I think and hope this load will get be to 1,000 yds.

Any more info on this subject is most welcomed.

All the best, and good grouping.

Peter Kelly

Chopper · Post by **Chopper** » Thu Feb 15, 2007 11:48 pm

2206h mmm tell me more as seasons go by 2206 has been good.

Chopper · Post by **Chopper** » Thu Feb 15, 2007 11:52 pm

2930fps has been good to at 1000.