Very very nice shooting Malcolm! What's the full specs of your load?
Adam
Nice Fly Target
Moderator: Mod
-
Malcolm Hill
- Posts: 335
- Joined: Fri Aug 25, 2006 9:40 pm
- Location: Mid North S.A.
- Has thanked: 8 times
- Been thanked: 107 times
Adam
Nothing special about the load, 25gns 2208, Lapua case, CCI 450 primer and an 80gn Amax on top. Cases were annealed and trimmed prior to loading and put through the ultrasonic. Probably been fired 6 or 8 times. I think they might have been lightly body sized before neck sizing with a 244 bush. I normally use a larger bush with less neck tension but tried that just to see how it went. Still use the carbide expander button when sizing to keep things even. It shot well during the day and due to my not quite right wind call on the last shot at 500 I left one sitting just outside the X ring at 9 o'clock for a 60.9. Just missed out again, such is life. (The door is still open for you for the first 60.10 in S.A.)
Regards Malcolm.
Nothing special about the load, 25gns 2208, Lapua case, CCI 450 primer and an 80gn Amax on top. Cases were annealed and trimmed prior to loading and put through the ultrasonic. Probably been fired 6 or 8 times. I think they might have been lightly body sized before neck sizing with a 244 bush. I normally use a larger bush with less neck tension but tried that just to see how it went. Still use the carbide expander button when sizing to keep things even. It shot well during the day and due to my not quite right wind call on the last shot at 500 I left one sitting just outside the X ring at 9 o'clock for a 60.9. Just missed out again, such is life. (The door is still open for you for the first 60.10 in S.A.)
Regards Malcolm.
Menu
Newest members