Can anyone direct me to a gunsmith who would bush a bolt and turn down the firing pin to allow use of small primers.
Thanks
Dave
Bushing bolt for small firing pin
Moderator: Mod
-
- Posts: 203
- Joined: Mon Sep 21, 2020 12:02 am
Re: Bushing bolt for small firing pin
Hey mate, that’s something every gunsmith will be able to do. Just chat to your local smith.
-
- Posts: 81
- Joined: Fri Sep 22, 2017 9:00 pm
-
- Posts: 73
- Joined: Mon Sep 05, 2005 7:25 pm
- Location: western australia
Re: Bushing bolt for small firing pin
keith did a rem 700 bolt for me
.062 firing pin and barnard extractor
excellent job
.062 firing pin and barnard extractor
excellent job
-
- Posts: 118
- Joined: Tue Sep 08, 2020 9:40 pm
Re: Bushing bolt for small firing pin
Thanks for the replies. No local gunsmith in our area regretfully.
Did you have to send the whole rifle or just the bolt?
Will see if Keith would do the job for me.
Regards
Dave
Did you have to send the whole rifle or just the bolt?
Will see if Keith would do the job for me.
Regards
Dave
-
- Posts: 545
- Joined: Sun Feb 24, 2019 2:33 pm
- Location: Chinchilla
-
- Posts: 118
- Joined: Tue Sep 08, 2020 9:40 pm
Re: Bushing bolt for small firing pin
Near Townsville in NQ. Great place if you love fishing. Three boat ramps/creeks to go fishing withing 15min from home and a choice of ten within 1/2 hour! But no gunshop!
Dave
Dave
-
- Posts: 213
- Joined: Thu Jan 18, 2018 2:56 am
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 45 guests