Whether to stick with the same action?
Moderator: Mod
-
- Posts: 11
- Joined: Sun Sep 22, 2019 3:06 pm
Whether to stick with the same action?
Hello folks,
I'm curious as to whether shooters stick with the same action or use different actions. I have one only in Panda stolle (308 and 284 win). Most of the my fellow club members shoot Barnards and I originally sought one my self but ended up with a panda which shoots better than me. I guess my question should I stick with Panda or try other options. Is it more economical or efficient to stick with the same?
I'm curious as to whether shooters stick with the same action or use different actions. I have one only in Panda stolle (308 and 284 win). Most of the my fellow club members shoot Barnards and I originally sought one my self but ended up with a panda which shoots better than me. I guess my question should I stick with Panda or try other options. Is it more economical or efficient to stick with the same?
-
- Posts: 240
- Joined: Fri Sep 12, 2014 6:38 am
Re: Whether to stick with the same action?
Just my opinion
If your happy with the one gun stick with the panda
After owning every top action available I settled on a Barnard s
For me if you do change actions go the barnard though
If your happy with the one gun stick with the panda
After owning every top action available I settled on a Barnard s
For me if you do change actions go the barnard though
-
- Posts: 410
- Joined: Sat Feb 08, 2014 6:58 pm
- Location: Barossa Valley
Re: Whether to stick with the same action?
I have pandas. Nothing wrong with them, except they won't take the pressure of a Barnard. If I was starting again it would be Borden all the way. The upside you have with a Panda already is that Borden's can be ordered with a thicker recoil lug to accept Panda barrels. Nicest actions I've ever owned/used. Timed from factory and really good machining tolerances.
-
- Posts: 293
- Joined: Sat Apr 22, 2017 7:43 pm
Re: Whether to stick with the same action?
Actions don’t wear out, usually . Barrels do. Put a new barrel on and go again.
-
- Posts: 11
- Joined: Sun Sep 22, 2019 3:06 pm
Re: Whether to stick with the same action?
Barossa_222 wrote:I have pandas. Nothing wrong with them, except they won't take the pressure of a Barnard. If I was starting again it would be Borden all the way. The upside you have with a Panda already is that Borden's can be ordered with a thicker recoil lug to accept Panda barrels. Nicest actions I've ever owned/used. Timed from factory and really good machining tolerances.
So Bordens are comparable pressure wise with Barnards? Interesting news about fitting a panda barrel with a Borden action. Didn't know that! Thanks
-
- Posts: 410
- Joined: Sat Feb 08, 2014 6:58 pm
- Location: Barossa Valley
Re: Whether to stick with the same action?
I can't speak for how Borden v Barnard stack up pressure-wise, but both being steel actions will allow them to run hotter than the aluminum Panda. I prefer the Borden because of the bolt lift (you get more primary extraction compared to Barnard), but having said that, there are plenty of open guys running barnard actions with excellent results.
-
- Posts: 612
- Joined: Tue Oct 16, 2018 5:20 pm
- Location: 7321 Tas.
Re: Whether to stick with the same action?
Whether you have a Borden, Panda or any other modern action, choosing one over the other based on how much pressure it can handle speaks volumes about reloading practice.
Pete
Pete
-
- Posts: 410
- Joined: Sat Feb 08, 2014 6:58 pm
- Location: Barossa Valley
Re: Whether to stick with the same action?
PeteFox wrote:Whether you have a Borden, Panda or any other modern action, choosing one over the other based on how much pressure it can handle speaks volumes about reloading practice.
Pete
It is certainly a consideration when selecting an action. When comparing my Panda FTR rifle compared to friends Barnard FTR rifles all other things considered equal, you are able to run the same case/powder/bullet combination at higher pressure levels.
-
- Posts: 125
- Joined: Tue Feb 28, 2017 12:03 pm
Re: Whether to stick with the same action?
The other consideration is the weight saving ... my panda stolle weighs considerably less then my barnard being Alu. vs Steel ... that weight saving could be helpful to some trying to make weight Or allows you to use the extra and go longer / bigger barrel or weight in the stock etc etc.
I think its something like ~15 oz / 450gr difference. ... Thats a few inches of extra barrel length ?? ... dont quote me though as I havent weighed them personally
I think its something like ~15 oz / 450gr difference. ... Thats a few inches of extra barrel length ?? ... dont quote me though as I havent weighed them personally
Regards,
Jez
Jez
-
- Posts: 115
- Joined: Sun Aug 19, 2018 12:14 am
-
- Posts: 1337
- Joined: Fri Jan 25, 2013 8:18 pm
- Location: Branxton NSW
Re: Whether to stick with the same action?
I have owned barnard actions which are more than satisfactory however I replaced them with Borden’s as I like shiny things
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
-
- Posts: 336
- Joined: Wed Aug 19, 2015 9:32 am
Re: Whether to stick with the same action?
Hi I have both a Stolle Panda and a Barnard model s some of the good features about the Panda F class is that it comes with an integral 20 MOA rail and will take any rem 700 triggers, parts are easy to come by as there is an Australian importer so extractor claws and firing pins, springs, action wrenches,bore guides ect can be purchased easy.
The barnard S which is the smaller of the single shot actions, that is about 150 grams lighter than the model p also has rem 700 trigger hanger model p does not, this opens up a huge trigger selection.
The Barnard is made with much more finer tolerances than the stolle Panda F class, and is much more tighter in operation, but then the panda action has had about 6 barrels through it.
The borden action are shiny smooth and a a work of art but at about $ 1000 more than the Barnard's.
The barnard S which is the smaller of the single shot actions, that is about 150 grams lighter than the model p also has rem 700 trigger hanger model p does not, this opens up a huge trigger selection.
The Barnard is made with much more finer tolerances than the stolle Panda F class, and is much more tighter in operation, but then the panda action has had about 6 barrels through it.
The borden action are shiny smooth and a a work of art but at about $ 1000 more than the Barnard's.
-
- Posts: 11
- Joined: Sun Sep 22, 2019 3:06 pm
Re: Whether to stick with the same action?
Interesting info. Weight difference is important.What calibres can you use with your Barnard S model ? Can the 7 saum be used? Borden seems like the 20 year old Scotch!
-
- Posts: 612
- Joined: Tue Oct 16, 2018 5:20 pm
- Location: 7321 Tas.
Re: Whether to stick with the same action?
Barossa_222 wrote:PeteFox wrote:Whether you have a Borden, Panda or any other modern action, choosing one over the other based on how much pressure it can handle speaks volumes about reloading practice.
Pete
It is certainly a consideration when selecting an action. When comparing my Panda FTR rifle compared to friends Barnard FTR rifles all other things considered equal, you are able to run the same case/powder/bullet combination at higher pressure levels.
I think you must be talking about some other shooting movement where safety is not the prime consideration and the rules are made to be bent.
We are talking F/TR here? and .308 win?, where the maximum safe SAAMI pressure is 62,000 psi. and this max pressure is mandated by the rules. See rule 1.2(d) of the SSR's - i.e. the onus is on the shooter not to exceed manufacturers maximum loads or pressure.
Either you are seriously suggesting that a Panda action is suspect with a .308Win at 62,000psi or you are advocating reloading practice above 62000 psi - the reason for my initial comment.
Contrary to my initial gut reaction, I do mind (a lot) if your rifle explodes on the mound because it reflects badly on the shooting movement and its safety record and will inevitably affect everyone's shooting through increased attention from the 'authorities'. and we'll end up with some draconian rules on reloading.
I am not wanting a return to the 'good old days' of 7.62 NATO shooting, but stuck rounds, blown primers, actions unable to be opened without losing the projectile etc were almost unheard of, because the pressure was capped at 50,000psi. and the ammunition was standardised. Same deal if we stick at 62,000 psi with modern actions.
Rant over
Pete
-
- Posts: 11
- Joined: Sun Sep 22, 2019 3:06 pm
Re: Whether to stick with the same action?
JezL wrote:The other consideration is the weight saving ... my panda stolle weighs considerably less then my barnard being Alu. vs Steel ... that weight saving could be helpful to some trying to make weight Or allows you to use the extra and go longer / bigger barrel or weight in the stock etc etc.
I think its something like ~15 oz / 450gr difference. ... Thats a few inches of extra barrel length ?? ... dont quote me though as I havent weighed them personally
That's a noticeable plus. Doesn't take much to exceed 8.25 kg
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 59 guests