I have an old faithful Tikka T3 that's about 15 - 16 years old. The firing pin spring is getting a bit soft. And ideas where I can get a new one? I tried a Google search for firing pin springs + Australia, lots of trigger springs found but nothing for the firing pin.
Thanks, Andrew
new Tikka T3 firing pin spring?
Moderator: Mod
-
- Posts: 24
- Joined: Wed Jun 15, 2011 8:43 pm
- Location: Sydney
-
- Posts: 235
- Joined: Mon Sep 29, 2014 3:00 pm
- Location: Darwin (again)
Re: new Tikka T3 firing pin spring?
Page 7 of this only shows the firing pin complete assembly.
http://tikka.fi/sites/default/files/doc ... 042018.pdf
Use the part number and contact the Importer.
Failing that a B709 and import your own.
https://www.brownells.com/rifle-parts/b ... 31615.aspx
http://tikka.fi/sites/default/files/doc ... 042018.pdf
Use the part number and contact the Importer.
Failing that a B709 and import your own.
https://www.brownells.com/rifle-parts/b ... 31615.aspx
David Mickel
Darwin Rifle Club
Darwin Rifle Club
-
- Posts: 146
- Joined: Thu Mar 16, 2017 9:24 pm
Re: new Tikka T3 firing pin spring?
Try:
https://www.gunworks.co.nz/shop/categor ... mainspring
Don’t know if a B709 is needed for a spring?
https://www.gunworks.co.nz/shop/categor ... mainspring
Don’t know if a B709 is needed for a spring?
-
- Posts: 74
- Joined: Sat Jan 14, 2017 10:28 pm
Re: new Tikka T3 firing pin spring?
If you’re after a Gunworks NZ heavier spring, I think I have a spare here in Sydney. Note though they significantly increase the bolt lift if you’re okay with that.
-
- Posts: 24
- Joined: Wed Jun 15, 2011 8:43 pm
- Location: Sydney
Re: new Tikka T3 firing pin spring?
I saw Lumleys has a firing pin spring kit, on emailing them, they have a person / business in Australia that stocks their equipment. When the kit arrives *waiting on stock* Ill update the post with details
Andrew Smith
-
- Posts: 24
- Joined: Wed Jun 15, 2011 8:43 pm
- Location: Sydney
Re: new Tikka T3 firing pin spring?
Firing pin springs came in from Lumley today .. standard and a +10% spring, collet and several retaining clips.. two sets were just under $60 AUD
If you need any, you can email tom@lumleyarms.com *located in Australia so no headaches of needing import permits for a spring
If you need any, you can email tom@lumleyarms.com *located in Australia so no headaches of needing import permits for a spring
You do not have the required permissions to view the files attached to this post.
Andrew Smith
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 34 guests