So, I’m shooting F/TR at 1000-1200 where ES and SD really matter.
What are your reasonable expectations?
What are you tips for delivering less is more?
Today I was here:
Tips for reducing extreme spread
Moderator: Mod
-
- Posts: 157
- Joined: Mon Jul 15, 2019 1:44 pm
Tips for reducing extreme spread
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2181
- Joined: Fri Jun 26, 2009 8:21 pm
-
- Posts: 58
- Joined: Wed Aug 05, 2009 5:37 pm
Re: Tips for reducing extreme spread
Generally speaking, if you can maintain an ES of 20 fps consistantly you are doing ok. The secret in long range accuracy is in the tune of the rifle. No rifle will shoot at both ends of the range, so if it works at 300, it will not at 1,000. My suggestion is, get a barrel tuner fitted and play with it at "the longs". 8/900 is a good place to do it. You can "fiddle" with loads and seating depth, but this is a more complicated method, and in my experience does not last as long. Good luck!
Greg Warrian.
Greg Warrian.
-
- Posts: 891
- Joined: Mon May 19, 2014 7:11 pm
- Location: Townsville
Re: Tips for reducing extreme spread
GregW wrote:No rifle will shoot at both ends of the range, so if it works at 300, it will not at 1,000. .
Hi Greg,
Could you maybe expand on that. I don't know what I'm doing wrong but all mine seem to work at whatever range I set them for.
For the OP, for minimal ES do everything you can to produce consistent rounds. Be as close to 100% capacity (I'd rather be at 102 than 98) as you can. Don't underestimate the importance of set up on the mound.
-
- Posts: 147
- Joined: Thu Mar 16, 2017 9:24 pm
Re: Tips for reducing extreme spread
Tachyon, if I read your photo correctly that is an ES of 16fps? If so, and you get good groups at 300-500yds you should be fine at the longs. All my rifles that shoot well at 1,000, shoot well at 300. They are in tune from 1,000-300 with a specific projectile, that is stable and fly well.
Not necessarily the case the other way around:
Sometimes, a projectile will give some vertical at 1,000 where it seems ok at the shorts….. might not be your load or tune, but rather variable bc across the batch (ogive/bearing surface length or meplat form) Thus the rifle and projectile are in tune, but there could be a dimensional difference across the projectiles that cause the vertical deviation to be pronounced at the longs.
Give me a pm, if you want to talk it through.
Regards
Frans
Not necessarily the case the other way around:
Sometimes, a projectile will give some vertical at 1,000 where it seems ok at the shorts….. might not be your load or tune, but rather variable bc across the batch (ogive/bearing surface length or meplat form) Thus the rifle and projectile are in tune, but there could be a dimensional difference across the projectiles that cause the vertical deviation to be pronounced at the longs.
Give me a pm, if you want to talk it through.
Regards
Frans
-
- Posts: 608
- Joined: Tue Oct 16, 2018 5:20 pm
- Location: 7321 Tas.
Re: Tips for reducing extreme spread
James
this video might answer some of your questions - reverse engineering required elevation dispersal into ES
https://youtu.be/Qelz4VBq_Dk
Pete
this video might answer some of your questions - reverse engineering required elevation dispersal into ES
https://youtu.be/Qelz4VBq_Dk
Pete
-
- Posts: 157
- Joined: Mon Jul 15, 2019 1:44 pm
Re: Tips for reducing extreme spread
PeteFox wrote:James
this video might answer some of your questions - reverse engineering required elevation dispersal into ES
https://youtu.be/Qelz4VBq_Dk
Pete
Thanks Pete, very helpful.
-
- Posts: 608
- Joined: Tue Oct 16, 2018 5:20 pm
- Location: 7321 Tas.
Re: Tips for reducing extreme spread
The aim of reducing extreme spread is to reduce vertical at long range. However James you seem to have got your ES very low. what if your vertical is coming from somewhere else?
Have you considered that it might be BC variation between bullets.
An interesting read for you
https://www.accurateshooter.com/gear-re ... nting-die/
With all of this stuff it's a matter of how deep down the rabbit hole you want to go.
Pete
Have you considered that it might be BC variation between bullets.
An interesting read for you
https://www.accurateshooter.com/gear-re ... nting-die/
With all of this stuff it's a matter of how deep down the rabbit hole you want to go.
Pete
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 9 guests