Oplo Hits Assembly Phase

Suppliers - have a new product or service to announce? Shooters - have a question or suggestion for a Supplier?

Moderator: Mod

Message
Author
Oplo
Posts: 24
Joined: Sun May 17, 2020 5:36 pm

Oplo Hits Assembly Phase

#1 Postby Oplo » Mon Nov 02, 2020 7:30 pm

Oplo's first fully machined and anodised base is currently being assembled with the first batch commencing assembly shortly thereafter. This unit will be used for test and evaluation (machining passes are a bit faster).

Components will be either highly polished or glass bead blasted and anodised in silver or champagne. Feet and foot screw knobs (in image) are raw Aluminium requiring bead blasting and anodising in black for the feet and champagne for the knobs. Column carriages and front spherical bearing mount are already bead blasted and require champagne anodising.

Under base coarse mechanism bay with machined pockets are ready for installation of components. This F6 is for a right handed shooter. For left handed shooters all components are the same with only machining to the opposite pocket required.

An additional 4 lightening pockets will be machined into the first batch. Later batches will have the pockets cast in.


A TITANIUM VERSION IN F6 WILL BE AVAILABLE

Versions: F6, F6-Ti and F7-Ti PRO

Optional extras: Counterbalance with 1 barrel weight and extra barrel weight if required

F7-Ti PRO will be available mid 2021 with tuneable joystick sensitivity

Oplo F6 Casting 005.jpeg

Oplo F6 Casting 006.jpeg

Oplo F6 Casting 001.jpeg

Oplo F6 Casting 002.jpeg

Oplo F6 Casting 003.jpeg
You do not have the required permissions to view the files attached to this post.

willow
Posts: 567
Joined: Sat Aug 15, 2015 9:51 pm

Re: Oplo Hits Assembly Phase

#2 Postby willow » Sat Nov 14, 2020 11:17 am

That base looks huge!

Oplo
Posts: 24
Joined: Sun May 17, 2020 5:36 pm

Re: Oplo Hits Assembly Phase

#3 Postby Oplo » Sat Nov 14, 2020 8:27 pm

Willow, you are correct, it is. Front foot is 260mm forward of the columns. Rear feet are 87mm rear of the columns. Rear feet span is 448.4mm.

willow
Posts: 567
Joined: Sat Aug 15, 2015 9:51 pm

Re: Oplo Hits Assembly Phase

#4 Postby willow » Sun Nov 15, 2020 6:31 pm

Oplo wrote:Willow, you are correct, it is. Front foot is 260mm forward of the columns. Rear feet are 87mm rear of the columns. Rear feet span is 448.4mm.


Maybe you should re-name it to the Antonov :D


Return to “Supplier News and Discussion”

Who is online

Users browsing this forum: No registered users and 16 guests