Equipment & Technical

Moderator: Mod

New Topic

3148 topics

Page 1 of 63
- Jump to page:
1
2
3
4
5
…
63
Next

Topics

Replies

Views

Last post

Telescopic Sight Poll

Last post by Trevor Rhodes « Tue Mar 19, 2024 12:04 pm
Replies: 18
1

2
This topic has a poll. by AlanF » Sat Aug 06, 2022 6:57 pm
Rating: 1.66%
First post

There has been a request to run a poll on telescopic sights. This is mainly for the benefit of shooters who are looking at purchasing a scope. You're...

Last post

I started using Ziess scopes, great optics but only 24 power and the turrets are in quarters, l had a lot of success with them and l had a nf...
18 Replies

29736 Views

Last post by Trevor Rhodes View the latest post
Tue Mar 19, 2024 12:04 pm
F-Open Calibre Poll - Long Range

Last post by Fire Dog « Mon Dec 11, 2023 4:14 pm
Replies: 20
1

2
This topic has a poll. by AlanF » Thu Jun 25, 2015 10:34 am
Rating: 1.32%
First post

Note there are 3 polls. This one is for long ranges (over 600 yards). So if you must choose two different calibres to use at a Queens shoot, what...

Last post

Up to 600yds it is the mighty 6BR for me and past that I have finally conceded the need for a 7mm unless conditions are good...
That said, I have...
20 Replies

72929 Views

Last post by Fire Dog View the latest post
Mon Dec 11, 2023 4:14 pm
F-Open Calibre Poll - All Round

Last post by CBH Australia « Wed Oct 19, 2022 9:10 pm
Replies: 7
This topic has a poll. by AlanF » Thu Jun 25, 2015 10:39 am
Rating: 0.99%
First post

Note there are 3 polls. This one is for all ranges from 300 to 1000yds. So if you must use a single calibre throughout a Queens shoot, what would you...

Last post

Old thread but how do people rate the 7-08ai?
I like my 7-08 Tikka CTR shooting pests from the car

7 Replies

54521 Views

Last post by CBH Australia View the latest post
Wed Oct 19, 2022 9:10 pm
F-Open Calibre Poll - Short Range

Last post by Bigtravoz « Mon Sep 04, 2017 7:12 pm
Replies: 13
This topic has a poll. by AlanF » Thu Jun 25, 2015 10:30 am
Rating: 0.66%
First post

Note there are 3 polls. This one is for short ranges (up to 600 yards). So if you must choose two different calibres to use at a Queens shoot, what...

Last post

243 should be fine also for short range.

13 Replies

42231 Views

Last post by Bigtravoz View the latest post
Mon Sep 04, 2017 7:12 pm
CCI BR4 Primers

Last post by Chopper « Tue Jul 23, 2024 2:24 pm
Replies: 22
1

2
by loneranger » Sun Jun 19, 2022 8:14 pm
Rating: 0.33%
First post

Has anyone been having issues with BR4 Primers ?
I have been experiencing more and more primers failing to fire from the same batch of primers. At...

Last post

Sorry CCI 450 Magnum Are the primers.
22 Replies

6222 Views

Last post by Chopper View the latest post
Tue Jul 23, 2024 2:24 pm
Barnard bolt handle

Last post by richmac « Fri Jul 19, 2024 10:19 am
Replies: 1
by haemish762 » Thu Jul 18, 2024 9:51 pm

First post

Hi all, could anyone tell me the thread for the Barnard P bolt handles that screw into the bolt body.

Last post

Hi Haemish
Barnard Bolt thread 3/8 24 TPI UNF

1 Replies

389 Views

Last post by richmac View the latest post
Fri Jul 19, 2024 10:19 am
Tri May Actions - Barnard Replacement?

Last post by eico « Mon Jul 15, 2024 6:04 pm
Replies: 7
by PeteFox » Mon Jun 17, 2024 9:42 am
Rating: 0.99%
First post

Some of you wouldn't have seen this, so I'm reposting here, found on facebook .
Seems like it's a drop in replacement for a Barnard. would be...

Last post

Thank you for the details provided. Cheers

7 Replies

1591 Views

Last post by eico View the latest post
Mon Jul 15, 2024 6:04 pm
223 Advice.

Last post by tom1 « Sun Jul 14, 2024 11:48 pm
Replies: 6
by tom1 » Mon Jul 08, 2024 10:17 am
Rating: 2.32%
First post

We have a young bloke that is interested in coming down to our range to use his 223 in Sporter Class. It has a 21 inch barrel & I in 12 twist. He...

Last post

This morning our club shot at 300 yards. The young bloke showed up & we set him up for Sporter Class. First application he scored 38.1. He was...

6 Replies

751 Views

Last post by tom1 View the latest post
Sun Jul 14, 2024 11:48 pm
Autodod question

Last post by jasmay « Fri Jul 12, 2024 10:09 pm
Replies: 1
by Rogue22 » Fri Jul 12, 2024 8:38 pm
Rating: 0.66%
First post

I’m looking to start neck turning my cases for FTR, even with Lapua cases and running an undersize mandrel I seem to get 2 distinctly different...

Last post

Send me a PM mate…. Interested in helping.

1 Replies

518 Views

Last post by jasmay View the latest post
Fri Jul 12, 2024 10:09 pm
7MM/6.8WESTERN

Last post by John T « Wed Jul 10, 2024 4:06 am
Replies: 3
by John T » Tue Jul 02, 2024 8:00 pm
Rating: 0.33%
First post

Hello.
This topic may have been discussed previously, but has anyone developed and tested a 7mm wildcat of the 6.8 Western? (Rod, I will not believe...

Last post

Hello Frank.
As always, a generous contribution.
F Open was the intended use.
But I have made a serious blunder! The shoulder-to-mouth length of the...

3 Replies

669 Views

Last post by John T View the latest post
Wed Jul 10, 2024 4:06 am
Sierra 2156 load infor

Last post by Blindbat « Tue Jul 09, 2024 1:10 am
Replies: 2
by theoldfart » Mon Jul 08, 2024 10:36 pm
Rating: 1.99%
First post

Hi, relatively new to this forum and after over 30 years away from Target Rifle shooting, I have decided to have a crack at either FTR or F...

Last post

A word of warning about brass. Winchester cases are less uniform and have thinner walls than Lapua. Consequently they will have lower pressures with...

2 Replies

498 Views

Last post by Blindbat View the latest post
Tue Jul 09, 2024 1:10 am
7 SAUM Brass Prep

Last post by JezL « Thu Jul 04, 2024 3:28 pm
Replies: 6
by AngryDropbear » Thu Jul 04, 2024 1:35 pm
Rating: 0.66%
First post

Gday Guys,

Just got my Norma Brass for a new 7 saum brass. Intend to build a dummy round for the gunsmith to calculate free bore. Was thinking about...

Last post

No worries! Happy to help.

Also dont take my preference for Chamber Clearance ... Everyone has there own preference with clearance.
For the 7mm's...

6 Replies

766 Views

Last post by JezL View the latest post
Thu Jul 04, 2024 3:28 pm
Quickload help FOUND thank you

Last post by saum2 « Sun Jun 30, 2024 11:10 am

by saum2 » Sun Jun 30, 2024 11:10 am

Anyone with Quickload software able to assist with a project that's not going too well.

0 Replies

327 Views

Last post by saum2 View the latest post
Sun Jun 30, 2024 11:10 am
6 Dasher Brass Question

Last post by Blindbat « Fri Jun 28, 2024 6:22 pm
Replies: 6
by Blindbat » Tue May 07, 2024 12:15 pm
Rating: 1.99%
First post

Everything I have read about producing 6 Dasher brass involves starting with 6br cases and hydroforming, creating a false shoulder or the hillbilly...

Last post

I'd like to thank everyone for their advice. I have broken open more than one piggy bank and bought some Alpha brass. The thing I like about Lapua...

6 Replies

1370 Views

Last post by Blindbat View the latest post
Fri Jun 28, 2024 6:22 pm
7w/6.5 load

Last post by Frank Green « Tue Jun 25, 2024 12:05 pm
Replies: 31
1

2

3
by heritage5 » Tue Jan 09, 2024 5:36 pm
Rating: 11.59%
First post

Hi all I have a necked up 6.5 prc to 7mm trying to get 180 hybrid target to shoot I am at 60.5 of 2217 2950 fps but am struggling to get them to...

Last post

You’re welcome Jezl!

From the data I got out of the test barrel and if your reamer spec is like mine etc…

I’d say about 52.5 possibly 53.0 is a max...
31 Replies

7647 Views

Last post by Frank Green View the latest post
Tue Jun 25, 2024 12:05 pm
Lee Collet Die Small Decapping Pin

Last post by tom1 « Thu Jun 20, 2024 3:32 pm
Replies: 6
by tom1 » Thu Apr 18, 2024 10:51 am
Rating: 1.66%
First post

Okay, I've just sold one kidney to buy some 308 Palma brass. I normally use a small base die & a Lee Collet die to prepare my 308 ADI or...

Last post

I ended up getting another Lee collet die. I put the mandrel in a drill & carefully filed the pin down, then tidied up with wet & dry. Works...

6 Replies

1857 Views

Last post by tom1 View the latest post
Thu Jun 20, 2024 3:32 pm
Neck tension (continued) and other considerations

Last post by wsftr « Wed Jun 19, 2024 6:47 am
Replies: 3
by John Weigel » Tue Jun 18, 2024 1:26 pm
Rating: 1.32%
First post

After the recent discussion about neck-lubes and neck tension issues, I decided to check my earlier conclusion that it doesn't make a lot of...

Last post

Its interesting as Erik C states that neck tension doesn't matter it just needs to be consistent. He consequently only makes two mandrel sizes.
So...

3 Replies

976 Views

Last post by wsftr View the latest post
Wed Jun 19, 2024 6:47 am
Neck seating lubrication advice

Last post by PeteFox « Tue Jun 18, 2024 1:20 pm
Replies: 17
1

2
by fclassNrugby » Fri Jun 14, 2024 7:42 am
Rating: 8.94%
First post

Hi All,

I am concerned that my neck tensions are not consistent and interested in finding ways to improve. I use a Redding collar neck sizing die...

Last post

Yes, and the problem is attributing an improvement or it's opposite to one factor, when it might be something else entirely.
The rabbit hole
17 Replies

1576 Views

Last post by PeteFox View the latest post
Tue Jun 18, 2024 1:20 pm
Proof Research Stainless barrels

Last post by Mick_762 « Sat Jun 15, 2024 1:59 pm
Replies: 3
by Mick_762 » Mon May 20, 2024 7:37 am
Rating: 0.66%
First post

Is there any knowledge on the Proof barrels?

I have been offered a 30” 1:7.5 6mm SS (non carbon wrapped) Med Palma profile - for a reasonable price....

Last post

Thanks mate, sorry for the delay in reply.

3 Replies

1130 Views

Last post by Mick_762 View the latest post
Sat Jun 15, 2024 1:59 pm
Sierra 2156 variants

Last post by tom1 « Mon Jun 10, 2024 9:05 pm
Replies: 7
by majaci@bigpond.com » Fri Jun 07, 2024 7:08 pm
Rating: 0.66%
First post

Does anyone know for sure what is the difference between 2156, 2156B and 2156C?
Some say designation B and C are 'bulk' and 'carton' and some believe...

Last post

That's reassuring Geoff. Unfortunately I doubt if quality projectiles or lower grade projectiles would make a great deal of difference to my scores...

7 Replies

1174 Views

Last post by tom1 View the latest post
Mon Jun 10, 2024 9:05 pm
Myths and Mysticism in Load Development

Last post by Drop shot « Fri Jun 07, 2024 6:36 am
Replies: 201
1

…

10

11

12

13

14
by DingoDeerHunter » Thu Jun 15, 2023 1:55 pm
Rating: 85.76%
First post

A mob called "Blackburn Defense" has started a YT channel delving into the issue of what testing can show results between performance of...

Last post

The tune window is the big one, but it's linked to OBT. The mass is doing 99% of the work. The micrometer adjustment of the tuner is probably more...
201 Replies

70472 Views

Last post by Drop shot View the latest post
Fri Jun 07, 2024 6:36 am
Case Prep Station

Last post by Rich4 « Wed Jun 05, 2024 8:19 pm
Replies: 2
by Mark De » Tue Jun 04, 2024 12:02 pm
Rating: 0.66%
First post

Hi Chaps.
I am after a case preparation station.
I am open to recommendations.

Last post

Another vote for the RCBS, I got mine on special though,
I’d really like the hornady cast iron case prep centre or the Frankfort arsenal case prep,...

2 Replies

995 Views

Last post by Rich4 View the latest post
Wed Jun 05, 2024 8:19 pm
Alliant/Reloader powder

Last post by superx10 « Sun Jun 02, 2024 4:41 am
Replies: 9
by Frank Green » Fri May 31, 2024 2:06 am
Rating: 1.66%
First post

Just a fyi for you all.

I don't know what the availability is of Alliant/Reloader series of powder is by you all or how much you use it but this is...

Last post

Here is a link to a gun store that has a fair bit of powder in stock.

9 Replies

2240 Views

Last post by superx10 View the latest post
Sun Jun 02, 2024 4:41 am
March Majesta reticle question

Last post by Dan81 « Sun May 26, 2024 6:13 pm
Replies: 1
by John Weigel » Mon May 20, 2024 1:02 pm

First post

Does anyone have experience with the MTR - WFD reticle - designed for 1000 yd F-Class in March Magesta scope? It has the circle at approx super ring,...

Last post

John,

When I looked at this option I found all the videos and write ups on it were when its on 80X power,
Ive never shot above 50X power So when I...

1 Replies

959 Views

Last post by Dan81 View the latest post
Sun May 26, 2024 6:13 pm
Wilson Die Question

Last post by superx10 « Wed May 22, 2024 1:35 pm
Replies: 8
by superx10 » Wed May 22, 2024 11:50 am
Rating: 0.66%
First post

Hi am full length sizing some 6.5 Peterson Brass after mandriling up from 6.5 to 7mm with a .309 bush i am using a foster press and a wilson die and...

Last post

Hi Thanks for your help but I have just worked out the problem .......I hade removed the decapping pin and found out the black knurled nut not only...

8 Replies

1061 Views

Last post by superx10 View the latest post
Wed May 22, 2024 1:35 pm
Large Rifle Primer avail...

Last post by Blade « Mon May 20, 2024 7:22 pm

by Blade » Mon May 20, 2024 7:22 pm
Rating: 0.33%

Picked up 5,000 Ginex LRP's at the VRA store Saturday morning.. Seems they have some left.. Ran my first load through and seem to be on point.....

0 Replies

868 Views

Last post by Blade View the latest post
Mon May 20, 2024 7:22 pm
Moly Coating

Last post by ned kelly « Wed May 15, 2024 9:22 am
Replies: 11
by crunchy » Wed Apr 24, 2024 7:51 am
Rating: 5.96%
First post

Are shooters still moly, WS2 and HBN coating their bullets
For FOpen.
What are the pros and cons in this age , have seen posts that are years old
But...

Last post

G'day Bat,
I moly'd 75Amax's and they were fine. I used a gemstone tumbler and the rpm was low. Accuracy was spot on at 600yds
Cheerio Geoff

11 Replies

2504 Views

Last post by ned kelly View the latest post
Wed May 15, 2024 9:22 am
WTB Throw lever for NF competion

Last post by Tim L « Sun May 12, 2024 9:34 pm
Replies: 3
by superx10 » Sun Mar 03, 2024 1:17 pm

First post

As the title says does anyone know of any aftermarket makers of a throw lever for the very popular Nightforce competition to make it easier to change...

Last post

Prototype
Testing at NQ King's

20240512_213053.jpg

3 Replies

2188 Views

Last post by Tim L View the latest post
Sun May 12, 2024 9:34 pm
MCIS scoring

Last post by superx10 « Wed May 01, 2024 8:34 pm
Replies: 4
by superx10 » Wed May 01, 2024 9:10 am

First post

Can anyone explain how the mcis maths work for interclub shoots were Fst Ftr and open are given a differnt factor to work out the finished group...

Last post

Hi It seems to be hard on FTR and easy FSD I should look at it a bit closer

4 Replies

1211 Views

Last post by superx10 View the latest post
Wed May 01, 2024 8:34 pm
Wet weather plotting

Last post by Daveh « Mon Apr 22, 2024 11:19 pm
Replies: 2
by Daveh » Mon Apr 22, 2024 8:17 pm
Rating: 0.99%
First post

Can anyone let me know where I can purchase a rain cover/clipboard to keep plot sheets dry if it rains while shooting.
I'm not sure what they are...

Last post

Thanks very much..Ordered already.
Dave

2 Replies

1048 Views

Last post by Daveh View the latest post
Mon Apr 22, 2024 11:19 pm
Testing White River and OFV primers

Last post by Pablolig « Mon Apr 22, 2024 8:43 pm
Replies: 1
by John Weigel » Mon Apr 22, 2024 7:16 pm
Rating: 3.31%
First post

OK, straight up – this skinny data-set raises as may questions as it answers. But I figured it was worth sharing its rough-and-ready indications...

Last post

Adding to your good work, I managed to weigh 200 OFV primers yesterday. No testing done as yet, but I just thought that starting from a known base,...

1 Replies

1229 Views

Last post by Pablolig View the latest post
Mon Apr 22, 2024 8:43 pm
Shooting Berger 185 Hybrids with a FB of .250 or more

Last post by wsftr « Mon Apr 22, 2024 9:27 am

by wsftr » Mon Apr 22, 2024 9:27 am

Does anyone have any experience with shooting Berger 185 Hybrids with a lot of jump?
I want to use Hornardy 200ELDs and Berger 185 Hybrids in the...

0 Replies

836 Views

Last post by wsftr View the latest post
Mon Apr 22, 2024 9:27 am
Stocks

Last post by RDavies « Sun Apr 21, 2024 7:30 pm
Replies: 3
by JAMMD » Sat Apr 20, 2024 6:59 pm

First post

Hi all, any info appreciated, who is making TR stocks, keen to get 2x made same same so as keeping same body position, sticks are Omark in 308 and...

Last post

These are the stock Chopper mentioned. Stock 3.jpg stocks.jpg Stock 2.jpg

3 Replies

1387 Views

Last post by RDavies View the latest post
Sun Apr 21, 2024 7:30 pm
Paranoia at work - why I check everything

Last post by PeteFox « Sun Apr 21, 2024 9:34 am
Replies: 2
by PeteFox » Sat Feb 17, 2024 10:45 am
Rating: 3.64%
First post

I've got a new batch of Lapua 284 brass that I'm preparing.
Beautiful shiny stuff, but I'm still turning the necks.

Out of 300 turned pieces I have...

Last post

More paranoia = More checking

I've just prepped 257 rounds of .284W brass, turned out to be a waste of time. Photo of case interior taken after 7 x...

2 Replies

2575 Views

Last post by PeteFox View the latest post
Sun Apr 21, 2024 9:34 am
For Swap - Berger 200.20x

Last post by Tony GRC « Fri Apr 19, 2024 10:14 am
Replies: 2
by Tony GRC » Thu Apr 18, 2024 8:34 pm

First post

I have 4 unopened boxes of 100 Berger.30Cal 200.20x to swap for same number 185 Juggernaut Target.

Was going to try them but the Juggs go well so...

Last post

These have been taken.

2 Replies

1244 Views

Last post by Tony GRC View the latest post
Fri Apr 19, 2024 10:14 am
Hornardy .308 200 ELDX

Last post by BATattack « Wed Apr 17, 2024 9:17 pm
Replies: 3
by wsftr » Wed Apr 17, 2024 4:42 pm
Rating: 0.33%
First post

Hi,
I'm assuming I can run them at low 2600fps (2610 - 2630) in Lapua SRP brass without compromising brass life?
Does anyone have experience with...

Last post

Probably not is the short answer. Running 208 Hornady I needed a throat length equivalent to a 230 Berger. Your .170fb would be ok for 185 berger and...

3 Replies

1692 Views

Last post by BATattack View the latest post
Wed Apr 17, 2024 9:17 pm
Hornady 308 Win Vmax Projectiles

Last post by loneranger « Wed Apr 17, 2024 6:19 pm
Replies: 10
by loneranger » Fri Jul 02, 2021 11:48 pm
Rating: 2.65%
First post

Hi Guys,
This is not a technical question about target shooting, but actually people's hunting experiences using Hornady V Max bullets. Perhaps this...

Last post

Well been doing more load development with 110gn Vmax pills in my 308win and they do shoot well. I am getting consistent 0.4 to 0.6 MOA @ 100 with...

10 Replies

4983 Views

Last post by loneranger View the latest post
Wed Apr 17, 2024 6:19 pm
Small Rifle Primer Comparison

Last post by Rich4 « Sun Apr 14, 2024 8:01 am
Replies: 3
by tom1 » Sat Apr 13, 2024 9:57 am
Rating: 0.33%
First post

Are Federal GM205M primers equivalent to CCI 450 or CCI BR4 primers. I have always used CCI primers in my Omark 223 without have any problems. Do...

Last post

There’s a lot of useful information on this page by Laurie Holland

3 Replies

1883 Views

Last post by Rich4 View the latest post
Sun Apr 14, 2024 8:01 am
Stepping on Alpha Munitions 308 Winchester brass

Last post by Frank Green « Thu Apr 11, 2024 12:47 am
Replies: 12
by MaxordPRS » Tue Mar 26, 2024 2:11 pm
Rating: 7.28%
First post

G'day Guys, thought this may be of interest to someone...

Ultimate Reloader has pushed a 215 Berger using Alpha Munitions 308 Winchester brass to...

Last post

^^^^ this right here guys! Even if the brass can take it.... doesn't mean the action or other components will handle a steady diet of loads at these...

12 Replies

3493 Views

Last post by Frank Green View the latest post
Thu Apr 11, 2024 12:47 am
Barnard trigger adjustment.

Last post by scott/r « Sat Apr 06, 2024 8:38 pm
Replies: 2
by scott/r » Sat Apr 06, 2024 8:06 pm
Rating: 0.33%
First post

Hi guys, has anyone got a copy of the barnard trigger adjustment page they'd be able to post up please. I can't find my copy and I can't get their...

Last post

Thank you Tim.

2 Replies

1511 Views

Last post by scott/r View the latest post
Sat Apr 06, 2024 8:38 pm
My RPA Quadlite

Last post by sullivan « Fri Mar 29, 2024 11:34 am
Replies: 3
by sullivan » Wed Mar 27, 2024 5:47 pm
Rating: 0.33%
First post

According to a pdf downloaded from RPA International, the clearance between the cocking pin and the bottom of the cocking ramp, should be...

Last post

Jim,
Sorry to do this, the day being what it is.
Did you mean for me to send an email to your business, or a PM through this website?
All in your own...

3 Replies

3039 Views

Last post by sullivan View the latest post
Fri Mar 29, 2024 11:34 am
Using a Foster bushing in a wilson FL die

Last post by superx10 « Thu Mar 28, 2024 3:51 pm
Replies: 2
by superx10 » Thu Mar 28, 2024 3:39 pm

First post

Hi, Just a bit of information on the above topic, I just purchased a foster .310 bushing but only have a wison FL, the foster bush looks a little...

Last post

Thanks for the info.

2 Replies

2167 Views

Last post by superx10 View the latest post
Thu Mar 28, 2024 3:51 pm
NF – 12-42x56

Last post by Bart « Wed Mar 27, 2024 1:41 pm

by Bart » Wed Mar 27, 2024 1:41 pm

Does the thread in the objective end of the Nightforce12-42x56 scope relate to a camera lens filter for fitting and size?
TIA

0 Replies

1923 Views

Last post by Bart View the latest post
Wed Mar 27, 2024 1:41 pm
White River Large Rifle Primers

Last post by PeteFox « Wed Mar 27, 2024 12:33 pm
Replies: 8
by Steve N » Tue Mar 19, 2024 5:15 pm
Rating: 5.3%
First post

I managed to get a box of these today from a local gun shop
They were nearly sold out by the time I heard about them and only have several hundred...

Last post

My White River primers arrived today.

I'll be doing a bit more measuring later, but I grabbed a random ten and checked their height, mainly because...

8 Replies

3925 Views

Last post by PeteFox View the latest post
Wed Mar 27, 2024 12:33 pm
Ohaus Scout SPX Scale - Opinions?

Last post by ECM « Sun Mar 24, 2024 10:34 am
Replies: 2
by Central Desert » Sat Mar 23, 2024 12:10 pm
Rating: 0.66%
First post

Ohaus Scout SPX Scale - Has any members had any experience using these scales? Appreciate your opinions, Cheers Martin.

Last post

I’ve been using one for quite some time, no issues.
I calibrate and check against a beam scale but have had no false readings.

2 Replies

2256 Views

Last post by ECM View the latest post
Sun Mar 24, 2024 10:34 am
new lot of powder average 37 FPS slower

Last post by wsftr « Wed Mar 20, 2024 10:45 am
Replies: 5
by wsftr » Mon Mar 18, 2024 8:46 am
Rating: 2.65%
First post

Hi,
I have a new lot of ADI 2208 powder that is averaging 37ps slower than the previous lot.
Groups have opened up close to double. nothing else is...

Last post

this bottle is MEM7494.
I wont go down the drying route for 40 fps. Until the shortages I have always had a barrels worth of components, powder etc....

5 Replies

2601 Views

Last post by wsftr View the latest post
Wed Mar 20, 2024 10:45 am
Rodzilla top still legal here?

Last post by PeteFox « Tue Mar 19, 2024 2:34 pm
Replies: 12
by Tim N » Tue Feb 27, 2024 3:11 pm
Rating: 1.32%
First post

Hi All
Just checking if my rodzilla top is still legal in OZ?
Thanks

Last post

If Australia follows the ICFRA rules, then the roller tops will become illegal here too.
Below is an extract from the Minutes of the ICFRA F Class...

12 Replies

3444 Views

Last post by PeteFox View the latest post
Tue Mar 19, 2024 2:34 pm
Air adjustable rear bag

Last post by Walt « Tue Mar 19, 2024 12:49 pm
Replies: 7
by Adam Lubke » Sun Mar 17, 2024 9:46 am
Rating: 0.99%
First post

Hi,

Does any know if a Ryan Cheney Air Foil Precision Shooting Rear Bag is approved for F Class Open?

Rules state
(e) There may be no mechanical...

Last post

better get a lawyer son better get a real good one

7 Replies

2596 Views

Last post by Walt View the latest post
Tue Mar 19, 2024 12:49 pm
Ohaus Scout vs AnD Scales

Last post by MarkS « Sun Mar 17, 2024 7:23 am
Replies: 2
by doyley_04 » Sat Mar 16, 2024 2:17 pm
Rating: 0.33%
First post

Has anyone had anything to do with the Ohaus scales? Budget is a little tight but would like the .001g scales and have found that the 120Fxi are hard...

Last post

As Bat ^^
Get the A&D if you have any plan of using AutoTrickler, etc

Purchased mine from Scale Shop

You get the FX-300 x 0.001 (the 120 is...

2 Replies

2080 Views

Last post by MarkS View the latest post
Sun Mar 17, 2024 7:23 am
WTB - SEB Joypod X - FTR Bipod

Last post by jcook1100 « Sat Mar 16, 2024 2:35 pm
Replies: 1
by mattharris1972 » Wed Mar 13, 2024 2:35 pm

First post

I have recently started competitive shooting and need one of these bipods asap. On the list for a new one but 6-9 month wait.

Last post

Gday mate, In case you didn't get my last message a mate of mine has a red one for sale from the last shipment. He used it once but he prefers his...

1 Replies

2072 Views

Last post by jcook1100 View the latest post
Sat Mar 16, 2024 2:35 pm

New Topic

3148 topics

Page 1 of 63
- Jump to page:
1
2
3
4
5
…
63
Next

Return to Board Index

Who is online

Users browsing this forum: No registered users and 15 guests

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum