My 6x47L FO Rifle
Posted: Sun Jun 16, 2013 11:03 am
Gents,
Here's my new FO rifle.
Remington 700, Trued, PTG coned bolt.
Kreiger 28" 1-8T .266nk Heavy Varmint
Shehane Baby Tracker
Jewell BR Trigger
Sightron SIII 10-50x60 LRFCH
Ken Farrell Rings & Base
Did some load testing yesterday and settled on 39.5gr 2209 behind the 103gr Copperhead VLD. Held 3/4 X Ring at 1000yds. Was very happy with that.
Ran into a lil potential issue but. The batch if copperheads I've done my testing with are from July 2011 and this new batch I have are April 2013 and when I seated them using the same setting for my July 2011 copperhead and the COAL of the new rounds are 10 thou shorter but I'm hoping the Ojive location is the same. Will be testing at 300m this afternoon.
Cheers guys.
Here's my new FO rifle.
Remington 700, Trued, PTG coned bolt.
Kreiger 28" 1-8T .266nk Heavy Varmint
Shehane Baby Tracker
Jewell BR Trigger
Sightron SIII 10-50x60 LRFCH
Ken Farrell Rings & Base

Did some load testing yesterday and settled on 39.5gr 2209 behind the 103gr Copperhead VLD. Held 3/4 X Ring at 1000yds. Was very happy with that.
Ran into a lil potential issue but. The batch if copperheads I've done my testing with are from July 2011 and this new batch I have are April 2013 and when I seated them using the same setting for my July 2011 copperhead and the COAL of the new rounds are 10 thou shorter but I'm hoping the Ojive location is the same. Will be testing at 300m this afternoon.
Cheers guys.