Transferring Firearms Dealer Name & Licence # LRP Solutions 410462275
Seller Firearms Licence # 409111283
Firearm Serial # P05-081
Stock is a Phil Mastin laminate
308 is 1in10 twist and 34in
223 is 7 twist 30 in long
.223 bolt has surface discoloration but is very smooth
.308 bolt is in very good condition for an 05 model
I purchased these as my partner was just getting into shooting but she has lost interest and they have not been used and are sitting idle in the safe. Open to offers around $4900.
Steve
Barnard 308 and .223 for sale “Sold”
Moderator: Mod
Forum rules
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
-
Another Steve
- Posts: 70
- Joined: Fri Jul 22, 2022 6:40 pm
- Been thanked: 2 times
Barnard 308 and .223 for sale “Sold”
You do not have the required permissions to view the files attached to this post.
Last edited by Another Steve on Wed Jan 15, 2025 8:21 pm, edited 2 times in total.
-
Another Steve
- Posts: 70
- Joined: Fri Jul 22, 2022 6:40 pm
- Been thanked: 2 times
Menu
Newest members