Transferring Firearms Dealer Name & Licence #: Jerome Ziersch
Dealer # 304598X
Seller Firearms Licence #: 861-781-61B
Firearm Serial #: MST 1847
Description:Bat “ MST” R Bolt, L load port, R EJ Port
CM 1.4” Octgon, Flat Bottom, internal 20 MOA Pic Rail
Integral Lug. Mag Bolt face Sako Ext, Diamond Flute
(Alex Wheeler Specs)
ST = Short Throw (SAUM - WSM cases)
$3890.00 plus postage
Contact
Ken
0429016832
For Sale Bat “MST” Magnum action
Moderator: Mod
Forum rules
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
-
Ken Melgaard
- Posts: 144
- Joined: Fri Jul 01, 2005 7:32 pm
- Location: West Wodonga, Vic
- Has thanked: 4 times
- Been thanked: 88 times
-
Ken Melgaard
- Posts: 144
- Joined: Fri Jul 01, 2005 7:32 pm
- Location: West Wodonga, Vic
- Has thanked: 4 times
- Been thanked: 88 times
Re: For Sale Bat “MST” Magnum action
BAT MODEL MST
BAT's model MST started as a model M action, they then moved the bolt stop forward and shortened the load port. This is perhaps the best option for many cartridge’s used in 1000 yard matches such as the short Magnum cases.
Improvements over a standard model B include:
More bolt lug surface area, creating a stronger action.
Larger barrel tenon for more support around Magnum cases.
More bedding surface
More action screws (3) 1/4-28 and (1) 10-32
More support in the rear bridge making the bolt cycle smoother.
FEATURES
8.500” long and 1.4 Octagon with Integral 20 MOA picatinny rail and Integral recoil lug.
One piece bolt, with coned bolt head
Adjustable trigger hanger (0-30 included)
Weight is 43.8 oz
Load port length is 3.0 inches. 2.2" eject port (if dual port)
Action screws are included
Barrel tenon is 1.125 x 16 tpi.
BAT's model MST started as a model M action, they then moved the bolt stop forward and shortened the load port. This is perhaps the best option for many cartridge’s used in 1000 yard matches such as the short Magnum cases.
Improvements over a standard model B include:
More bolt lug surface area, creating a stronger action.
Larger barrel tenon for more support around Magnum cases.
More bedding surface
More action screws (3) 1/4-28 and (1) 10-32
More support in the rear bridge making the bolt cycle smoother.
FEATURES
8.500” long and 1.4 Octagon with Integral 20 MOA picatinny rail and Integral recoil lug.
One piece bolt, with coned bolt head
Adjustable trigger hanger (0-30 included)
Weight is 43.8 oz
Load port length is 3.0 inches. 2.2" eject port (if dual port)
Action screws are included
Barrel tenon is 1.125 x 16 tpi.
-
BATattack
- Posts: 1344
- Joined: Mon Dec 29, 2008 10:29 pm
- Has thanked: 92 times
- Been thanked: 280 times
Re: For Sale Bat “MST” Magnum action
This would be a very very nice action. I have an M and it's very slick and handles pressure extremely well.
This MST seems to be what they used to call the MB. Now has the same tennon as the M which provides more steel around magnum chamberings and extra support for long heavy barrels.
Someone is going to get a nice action for a build. Good luck with the sale.
This MST seems to be what they used to call the MB. Now has the same tennon as the M which provides more steel around magnum chamberings and extra support for long heavy barrels.
Someone is going to get a nice action for a build. Good luck with the sale.
-
Ken Melgaard
- Posts: 144
- Joined: Fri Jul 01, 2005 7:32 pm
- Location: West Wodonga, Vic
- Has thanked: 4 times
- Been thanked: 88 times
Menu
Newest members