Page 1 of 1
Stainless tumbling media
Posted: Wed Jul 13, 2022 7:07 am
by BATattack
Hi all
I'm on the hunt for some stainless tumbling media that is 1mm diameter X 12mm long or .040 X .500 in imperial.
Seems to be a good size that doesn't get stuck in cases
Re: Stainless tumbling media
Posted: Wed Jul 13, 2022 2:35 pm
by BillB
AussieSapphire.com.au
Re: Stainless tumbling media
Posted: Wed Jul 13, 2022 4:30 pm
by Tim L
In my experience it's not so much the size as the way the ends are cut that cause the pins to get stuck.
The ones from aussiesaphire are sliced at an angle, which results in the ends having very sharp points. These get themselves wedged. Try ebay, you're looking for flat ends.
https://www.ebay.com.au/itm/32521255124 ... BM8LHb475g
Re: Stainless tumbling media
Posted: Wed Jul 13, 2022 6:01 pm
by dazza284
I bought this stuff back in 2014 15 as I needed so much of it cos I built my own sizeable Tumblr at the time was way cheaper than Aussie Sapphire
https://www.ebay.com.au/itm/181754745074