Titan Rear Bag Plate gets a Mod
Posted: Fri Aug 06, 2021 6:31 pm
Rear Rest stability is a common and somewhat overlooked problem which Oplo has been addressing via the Atlas and Titan Rear Bag Plates.
We have revised the original Titan and created a MOD-1 version specifically for Australian competition rules or ammunition load development.
Oversize anchoring spikes at the front allow the plate to seat deep into to ground while spacer adjustable feet at the rear provide stability over a wide range of sloped surfaces. Front spikes are 45mm in length. Rear feet spikes are 32mm in length. Both are machined from 304L Stainless Steel.
Spikes and feet unscrew to retain compliance to International F Open competition ruling (ICFRA F2.9).
We have revised the original Titan and created a MOD-1 version specifically for Australian competition rules or ammunition load development.
Oversize anchoring spikes at the front allow the plate to seat deep into to ground while spacer adjustable feet at the rear provide stability over a wide range of sloped surfaces. Front spikes are 45mm in length. Rear feet spikes are 32mm in length. Both are machined from 304L Stainless Steel.
Spikes and feet unscrew to retain compliance to International F Open competition ruling (ICFRA F2.9).