Help with load recipe

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Lindzz
Posts: 59
Joined: Tue Jun 01, 2021 7:26 pm
Has thanked: 2 times
Been thanked: 2 times

Help with load recipe

Post by Lindzz »

Just had a 284 Shehane built

Chasing some advice on loads

Using 7mm Sierra match kings

AR2209
Peterson Brass

Gr ?
FPS ?
Jump or Jam ?

Any help would be appreciated

Cheers
willow
Posts: 599
Joined: Sat Aug 15, 2015 9:51 pm
Has thanked: 62 times
Been thanked: 221 times

Re: Help with load recipe

Post by willow »

A lot of people have tried the 183s, not many have succeeded with them - excluding a couple of the best in the country who have got them working well. I run a Shehane but use Berger 184s with 2213sc, also with Peterson brass. I'm running 54.7gr for 2810fps and my bullets are jumped 20 thou.
RDavies
Posts: 2336
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW
Has thanked: 715 times
Been thanked: 760 times

Re: Help with load recipe

Post by RDavies »

Lindzz wrote:Just had a 284 Shehane built

Chasing some advice on loads

Using 7mm Sierra match kings

AR2209
Peterson Brass

Gr ?
FPS ?
Jump or Jam ?

Any help would be appreciated

Cheers

Are you running the 180 Sierras or 183s?
In my Shahane I ran 55.5gn of 2213sc behind 183 Sierras jammed between .005 and .010".
I did try 2209 in this particular barrel but I think it was a fast lot of powder and at 52.0gn and 2800fps it just started showing some mild pressure signs.
I have the 183s working well in a few barrels and all of current barrels like jam but I have heard some preferred some jump. When 183s first came out I had a particularly tight barrel which loved the 183s jumped .010".
284s normally love 2209 so maybe give it a go, it might work well with your barrel and powder lot. If you reach pressure signs just as it starts to reach a speed it likes, then maybe try 2213sc.
Lindzz
Posts: 59
Joined: Tue Jun 01, 2021 7:26 pm
Has thanked: 2 times
Been thanked: 2 times

Re: Help with load recipe

Post by Lindzz »

Cheers Rod,
183's
I shot a couple at 52gr @ 2900, showed slight pressure signs so will start at 50gr and work up to 2780- 2800 max
Post Reply Previous topicNext topic