Page 1 of 1
308 barrel twist rate
Posted: Wed Jun 17, 2020 8:35 pm
by JustinKLP
I’m thinking of purchasing a Howa 1500 barrelled action as an entry into F/TR. Howa offer a 308 with a 26” barrel, however the twist rate is 1:8”. Is this going to be too fast for 155 grain projectiles? I don’t want to be “forced” into dealing with the extra recoil of 200+ grainers just to suit the barrel.
Re: 308 barrel twist rate
Posted: Wed Jun 17, 2020 8:58 pm
by lee_enfield223
not sure who told you that it has a 1/8 twist but look at OSA's web page listing the twist, it say's 1/10 also there's probably more experienced shooters here, but I have been using a 1/10 for about 30 years out to 800m with great results using either 155's or 168 grn pills
https://www.osaaustralia.com.au/product ... stainless/
Re: 308 barrel twist rate
Posted: Wed Jun 17, 2020 9:25 pm
by macguru
I have a 1/9 and it shoots 155s fine. 1/8 would be very unusual unless its a 300 blackout or a 308 designed to shoot subsonic 200gr projectiles....
Re: 308 barrel twist rate
Posted: Wed Jun 17, 2020 9:36 pm
by JustinKLP
My mistake, it appears the Howa 308 does come in a 1/10. Not sure how I got that wrong.
Good to know a 1/10 will be suitable for 155’s.
Re: 308 barrel twist rate
Posted: Thu Jun 18, 2020 5:35 pm
by Redhawk
1:10 works fine from 155-200’s, some 210’s.... good twist to start with.
Regards
Frans