Fixed my Farley wobbly head issue
Posted: Thu Oct 17, 2019 5:40 pm
Just had a eureka moment
The plate on the bottom of my Farley has a bit of clearance in the holes.
When it is tightened close to the joystick end the head wobbles very noticeably 2-3mm either side travelling up and down
When tightened away from the joystick this allows the vertical slide bars to engage properly in the guide channels- removing any “wobble” in the head.
The plate on the bottom of my Farley has a bit of clearance in the holes.
When it is tightened close to the joystick end the head wobbles very noticeably 2-3mm either side travelling up and down
When tightened away from the joystick this allows the vertical slide bars to engage properly in the guide channels- removing any “wobble” in the head.