Hi all,
I am looking for a pair of Remington 700 Action Screws, I have a surgeon 591 in an HS Precision stock and the ones I have do not have enough thread engagement in the action.
Please msg me on here if you have any or know where I can buy some
Thank you,
Tom.
WTB Rem700 Action Screws
Moderator: Mod
Forum rules
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
-
adamjp
- Posts: 28
- Joined: Sat Jan 12, 2019 5:54 pm
Re: WTB Rem700 Action Screws
I'll need to check tomorrow, but I think I have a pair of high quality stainless screws that I bought from the US but have not used. They are overlength ready to be cut to size.
Standard hex head socket on the end.
Standard hex head socket on the end.
Re: WTB Rem700 Action Screws
BATattack wrote:Should be 1/4" UNF thread. Do you have a fastener supplier near you?
I have been told there’s a place in brookvale otherwise I have ordered some UNF bolts online in the past for other things, worth a look there.
Re: WTB Rem700 Action Screws
adamjp wrote:I'll need to check tomorrow, but I think I have a pair of high quality stainless screws that I bought from the US but have not used. They are overlength ready to be cut to size.
Standard hex head socket on the end.
That sounds promising, I’ll check back tomorrow night cheers.
-
MarkS
- Posts: 150
- Joined: Fri Aug 30, 2019 8:20 am
- Location: Brisbane
- Has thanked: 52 times
- Been thanked: 88 times
Re: WTB Rem700 Action Screws
@locks,
Best fastener supplier in Aus with free post;
https://www.boltandnut.com.au/1-4-x-28- ... cap-screws
Easy way is to buy 1 1/4 longs and cut to length.
Usually appx 0.75" and 1.00" plus 5-20thou (depending on stock and whether you're using Nord-Lock washers).
Note bulk rates means it's usually better to buy more(10), keep some spares and give some to mates.
Best fastener supplier in Aus with free post;
https://www.boltandnut.com.au/1-4-x-28- ... cap-screws
Easy way is to buy 1 1/4 longs and cut to length.
Usually appx 0.75" and 1.00" plus 5-20thou (depending on stock and whether you're using Nord-Lock washers).
Note bulk rates means it's usually better to buy more(10), keep some spares and give some to mates.
Going broke one primer at a time
Re: WTB Rem700 Action Screws
adamjp wrote:I'll need to check tomorrow, but I think I have a pair of high quality stainless screws that I bought from the US but have not used. They are overlength ready to be cut to size.
Standard hex head socket on the end.
did you happen to have a check if you had those screws Adam?
Thanks, Tom.
Menu
Newest members