Collet die for SAUM

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Post Reply Previous topicNext topic
saum2
Posts: 1119
Joined: Fri Jun 13, 2008 12:22 am
Has thanked: 11 times
Been thanked: 111 times

Collet die for SAUM

Post by saum2 »

Does LEE make Collet dies for Rem SAUM?? and who might supply one in Aust?
Top
Weairy
Posts: 455
Joined: Tue Jul 17, 2018 1:43 pm
Location: Seymour, Vic
Has thanked: 74 times
Been thanked: 210 times

Re: Collet die for SAUM

Post by Weairy »

If they don't do one off the shelf, they'll make a custom one. Only cost about $60 last time we got one made for the 6BR. Send two cases & two projectiles over and they'll send you back a die. Takes a couple of months though.
Josh Weaire
Top
Tim L
Posts: 975
Joined: Mon May 19, 2014 7:11 pm
Location: Townsville
Has thanked: 43 times
Been thanked: 461 times

Re: Collet die for SAUM

Post by Tim L »

Just be careful and explain that you want the whole neck sized. 3 of us on here got some collet dies and when they turned up we found the top mm or so of the neck passed all the way through the collet and so wasn't sized. The logic in doing this is to enable easier seating, and it does indeed work. I decided to get a "full length" version so if you want to try the short one let me know.
Top
Post Reply Previous topicNext topic

Return to “Equipment & Technical”