I have a Trueflite 32 inch 280 Ackley plus customer tuner/ barrel weight.
Has had about 400-430 rounds down it a groups really well on my setup. Nodes at 2920 and 2980 but the 2920 id the best one.
Also, setup for reloading dies
1 Wilson micrometer seating die
1 Wilson neck die
1 redding Bump die
1 custom dies I use to size before neck turning.
200 Fire formed 280 Ackley cases fired 3 times. Blown out in a separate fireforming barrel made with the same reamer the twice in this barrel.
Barrel and custom die was made by ZRC custom rifles in South Australia. One of the best gunsmiths in Australia.
All you need to is screw it into your Barnard and you will have a complete setup with no other parts needed apart from some 2217, 180 hybrids and cci primers.
$800 plus post
PM me if you are interested.
Thes parts have been SOLD
Here you have an audience of people with similar equipment needs. Chances are that someone will have what you need or vice versa.
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests