7 mmm PRC SAAMI Spec
Moderator: Mod
-
- Posts: 330
- Joined: Wed Aug 19, 2015 9:32 am
7 mmm PRC SAAMI Spec
Cartridge and Chamber Designs Newly Accepted by SAAMI
Below is a link to a chamber print of the 7 MM PRC
My Question to F open shooters has it much advantage over the 7 mm SAUM ( If Any) will brass amiability be any better, performance ect , will our local gun smiths get a reamer for this new cartridge? It Has some impressive stats.
Below is a link to a chamber print of the 7 MM PRC
My Question to F open shooters has it much advantage over the 7 mm SAUM ( If Any) will brass amiability be any better, performance ect , will our local gun smiths get a reamer for this new cartridge? It Has some impressive stats.
You do not have the required permissions to view the files attached to this post.
Last edited by superx10 on Sat Jul 02, 2022 11:01 am, edited 1 time in total.
-
- Posts: 937
- Joined: Thu Oct 20, 2005 12:46 am
- Location: Cowra NSW
Re: 7 mmm PRC SAAMI Spec
Gunsmiths and barrel makes will love you and this cartridge. If I may ask, what "improvement" over the 7mm SAUM are you seeking?
Keith H.
Keith H.
-
- Posts: 546
- Joined: Sun Feb 24, 2019 2:33 pm
- Location: Chinchilla
-
- Posts: 330
- Joined: Wed Aug 19, 2015 9:32 am
Re: 7 mmm PRC SAAMI Spec
I have edited my post to include "if any"
The brass would probably necked up 6.5 brass
The brass would probably necked up 6.5 brass
-
- Posts: 937
- Joined: Thu Oct 20, 2005 12:46 am
- Location: Cowra NSW
Re: 7 mmm PRC SAAMI Spec
I can't see any positives, barrel life (lack of) would be the main issue, cost and availability of brass another. There are other issues such as a one caliber neck.
Keith H.
Keith H.
-
- Posts: 1287
- Joined: Mon Dec 29, 2008 10:29 pm
Re: 7 mmm PRC SAAMI Spec
The new SAMMI 7PRC is too big. It sits somewhere between the 7SAUM and 7WSM in case capacity. As far as I know Lapua aren't making brass for this at least at the moment..
The 6.5PRC necked up to 7mm in theory looks about perfect and where I'd throw my money. Capacity somewhere between 7SAUM and .284, Lapua already making brass, magnum case head should make primer pockets hold up well, short fat powder column should give good ES numbers and accuracy. I think we will be seeing a lot more on the line in the next few years.
The 6.5PRC necked up to 7mm in theory looks about perfect and where I'd throw my money. Capacity somewhere between 7SAUM and .284, Lapua already making brass, magnum case head should make primer pockets hold up well, short fat powder column should give good ES numbers and accuracy. I think we will be seeing a lot more on the line in the next few years.
-
- Posts: 330
- Joined: Wed Aug 19, 2015 9:32 am
-
- Posts: 798
- Joined: Sun Aug 13, 2017 11:04 pm
- Location: Qld
Re: 7 mmm PRC SAAMI Spec
superx10 wrote:Thanks Bat sound like the way to go.
U thinking of coming back to FO ?
-
- Posts: 1517
- Joined: Mon Nov 14, 2005 8:22 pm
Re: 7 mmm PRC SAAMI Spec
What BATattack said, only issue I see necking up the 6.5 is the neck will be very short.
-
- Posts: 937
- Joined: Thu Oct 20, 2005 12:46 am
- Location: Cowra NSW
Re: 7 mmm PRC SAAMI Spec
Matt P wrote:What BATattack said, only issue I see necking up the 6.5 is the neck will be very short.
Short neck with donuts. You always get donuts straight up when you neck up, but not so much when necking down.
Keith H.
-
- Posts: 1287
- Joined: Mon Dec 29, 2008 10:29 pm
Re: 7 mmm PRC SAAMI Spec
Matt P wrote:What BATattack said, only issue I see necking up the 6.5 is the neck will be very short.
Agreed. Would be interesting to try the SLR trick and increase the shoulder angle to give a bit more neck length. At the end of the day most are neck turning and aren't taking virgin brass to a serious match.
-
- Posts: 330
- Joined: Wed Aug 19, 2015 9:32 am
Re: 7 mmm PRC SAAMI Spec
Hi Sellsy
mmm Maybe the the cost of the 308 heavies in FTR is concerning a 180 7mm hybrid is looking better with each price rise.
mmm Maybe the the cost of the 308 heavies in FTR is concerning a 180 7mm hybrid is looking better with each price rise.
-
- Posts: 128
- Joined: Fri Jul 01, 2005 7:32 pm
- Location: West Wodonga, Vic
Re: 7 mmm PRC SAAMI Spec
The 6.5 PRC makes an interesting round necking up to 7mm & 30 caliber, am looking at the case as available from Lapua unlike the 7/300 SAUM case
A photo and H2O for comparison
A photo and H2O for comparison
You do not have the required permissions to view the files attached to this post.
-
- Posts: 798
- Joined: Sun Aug 13, 2017 11:04 pm
- Location: Qld
Re: 7 mmm PRC SAAMI Spec
superx10 wrote:Hi Sellsy
mmm Maybe the the cost of the 308 heavies in FTR is concerning a 180 7mm hybrid is looking better with each price rise.
Yes it’s a real problem even getting any sort of Bergers ! For me the lack of Componets has made me step back from the sport a tad , till it fixes itself! Maybe just doing local Opms! ( especially the cost of fuel etc ) sorry a little bit of topic ? Regards Sellsy!
-
- Posts: 330
- Joined: Wed Aug 19, 2015 9:32 am
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 13 guests