Looking for 7mm barrel FOUND

Here you have an audience of people with similar equipment needs. Chances are that someone will have what you need or vice versa.

Moderator: Mod

Message
Author
jmc
Posts: 64
Joined: Mon May 19, 2014 7:08 pm
Location: Warrnambool

Looking for 7mm barrel FOUND

#1 Postby jmc » Tue Dec 18, 2018 8:09 pm

Hi all looking for 7mm barrel for hunting gun project thanks
Last edited by jmc on Fri Dec 21, 2018 6:50 pm, edited 4 times in total.

Mick_762
Posts: 92
Joined: Mon Sep 29, 2014 3:00 pm

Re: Looking for 6.5 or .277 barrel

#2 Postby Mick_762 » Tue Dec 18, 2018 8:11 pm

jmc wrote:Hi all looking for a 6.5 or .277 barrel for hunting gun project thanks


New 6.5 barrels at Cleavers.

https://cleaverfirearms.com/Products.as ... IAN%20MADE

Old Trev-39
Posts: 152
Joined: Sat Sep 12, 2015 2:07 pm

Re: Looking for 7mm barrel

#3 Postby Old Trev-39 » Wed Dec 19, 2018 7:21 pm

New or used.

jmc
Posts: 64
Joined: Mon May 19, 2014 7:08 pm
Location: Warrnambool

Re: Looking for 7mm barrel

#4 Postby jmc » Wed Dec 19, 2018 8:11 pm

Used would be fine

AlexE
Posts: 92
Joined: Fri Feb 16, 2018 9:18 am

Re: Looking for 7mm barrel

#5 Postby AlexE » Wed Dec 19, 2018 8:19 pm

How long and what twist?

jmc
Posts: 64
Joined: Mon May 19, 2014 7:08 pm
Location: Warrnambool

Re: Looking for 7mm barrel

#6 Postby jmc » Wed Dec 19, 2018 8:20 pm

Hoping to have it about 21 to 24 inch long when finished open to all twist

AlanF
Posts: 6833
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

Re: Looking for 7mm barrel

#7 Postby AlanF » Thu Dec 20, 2018 8:07 am

Most used 7mm barrels of readers on this site will be very heavy. What profile are you hoping for?

jmc
Posts: 64
Joined: Mon May 19, 2014 7:08 pm
Location: Warrnambool

Re: Looking for 7mm barrel

#8 Postby jmc » Thu Dec 20, 2018 9:40 am

Varmint to heavy varmint AlanF

willow
Posts: 199
Joined: Sat Aug 15, 2015 9:51 pm

Re: Looking for 7mm barrel

#9 Postby willow » Thu Dec 20, 2018 2:18 pm

jmc wrote:Varmint to heavy varmint AlanF


I have a 7mm Brux, heavy varmint profile that has 1800 rounds through it - currently 30 inches long and chambered in 284 and sitting in the garage doing nothing. You could comfortably cut it down to your desired length and re-chamber it. Twist is 1:8.7 from memory. PM me if interested.

Old Trev-39
Posts: 152
Joined: Sat Sep 12, 2015 2:07 pm

Re: Looking for 7mm barrel

#10 Postby Old Trev-39 » Thu Dec 20, 2018 7:37 pm

Hi jmc,
9T Broughton H.V. .284 2000rounds. Cut chamber off and 25.5" left. $100-00 posted.
Cheers,
Trevor.


Return to “For Sale/Wanted to Buy”

Who is online

Users browsing this forum: AlexE and 4 guests