Reloading Equipment

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
LA105
Posts: 1
Joined: Sat Feb 24, 2018 8:07 pm

Reloading Equipment

#1 Postby LA105 » Sun May 20, 2018 6:06 pm

G'day,

I am about to buy hand loading equipment and would like opinions regarding single stage and multi stage presses and brands.

I have looked at Simplex Master press, RCBS single stage and Dillon multi stage.

Also what is the preferred Die brand for consistancy and reliability.

I will be loading 223 and 6.5 CM.

Cheers
Steve

Tim N
Posts: 788
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW

Re: Reloading Equipment

#2 Postby Tim N » Sun May 20, 2018 6:27 pm

Hey Steve,
I started with an rcbs partner kit which still sees use for bullet pointing and hunting loads.
My main press is an rcbs rock chucker with whidden bushing fls dies for sizing and Wilson in line seating dies with the micrometer tops for seating projies in a K&M press
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC

RDavies
Posts: 1839
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW

Re: Reloading Equipment

#3 Postby RDavies » Sun May 20, 2018 6:48 pm

Tim N wrote:Hey Steve,
I started with an rcbs partner kit which still sees use for bullet pointing and hunting loads.
My main press is an rcbs rock chucker with whidden bushing fls dies for sizing and Wilson in line seating dies with the micrometer tops for seating projies in a K&M press

What Tim said.
RCBS Rock Chucker press is onenof the more popular presses and reasonable price.
Whidden bushing FLS dies are as good as you can get, but Redding FLS bushing dies are next best if you are on more of a budget.
Like Tim, I much, much prefer to use Wilson in line seating dies for seating bullets.
The non micrometer Wilson seaters are good if you are on more of a budget.

SunnyCoast 5r
Posts: 168
Joined: Sun Oct 25, 2015 10:23 pm

Re: Reloading Equipment

#4 Postby SunnyCoast 5r » Sun May 20, 2018 7:14 pm

Try chrisw91 (CCW Engineering) on this site...he makes a press that looks pretty good. I have been very happy with the cleaning rods he produces. Support a fellow shooter and Aussie made.
I just use Lee dies: neck sizing & collet die produce good results; projectile seating is a bit fiddle to setup but once you have it to the desired depth it’s ok. Cheap option too.

!Peter!
Posts: 53
Joined: Sun Oct 30, 2016 6:35 am

Re: Reloading Equipment

#5 Postby !Peter! » Sun May 20, 2018 11:35 pm

I use a Lee classic cast press. The main feature that sold me on it is how it handles spent primers. The spent primers drop through the hollow ram into a tube. I plugged the slot for the priming arm which I don't use, and the spent primers and any residue are completely contained.

For dies I use Redding type s FL or Wilson bushing FL depending on who's is cheapest, lee collet and Wilson seater.

Gyro
Posts: 321
Joined: Sat Jun 10, 2017 2:44 pm
Location: New Zealand

Re: Reloading Equipment

#6 Postby Gyro » Mon May 21, 2018 4:32 am

The non micrometer Wilson bullet seating die is all I use and can accurately keep up with the seating depth changes just by measuring with the vernier the total die head length i.e. the top section with the protruding adjustable stalk.

Remember to run a note book that allows you to write down any die settings you made. Plus you can comment in the book on all kinds of stuff as you go along with your load development, like say the days ambient temp as u test etc. Lots of stuff is valuble to keep up with. Makes it a lot easier to get a handle on what's happening than relying on memory !

UL1700
Posts: 57
Joined: Sat Sep 16, 2017 5:39 pm

Re: Reloading Equipment

#7 Postby UL1700 » Mon May 21, 2018 9:20 am

I use a RCBS summit as the ease of access is fantastic. I mainly use Forster or RCBS competition dies with this press although I use the Hornady cam lock bullet puller as any bullet pullers that have a T bar handle are a pain to use with it. Increasingly I am doing everything with Wilson Dies but I still de prime on the RCBS and bullet pull when necessary. If I was buying now I would seriously look at the CCW...


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 8 guests