t s e barrels

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
bruce moulds
Posts: 2900
Joined: Sun Jun 19, 2005 4:07 pm

t s e barrels

#1 Postby bruce moulds » Wed Aug 30, 2017 5:01 pm

a recent phone call to t s e barrels reveals that they make stainless lapped barrel blanks up to 31" long finished length.
has anyone had experience with these barrels?
always good to buy aussi if it will do the job.
keep safe,
bruce.
"SUCH IS LIFE" Edward Kelly 11 nov 1880
http://youtu.be/YRaRCCZjdTM

GSells
Posts: 798
Joined: Sun Aug 13, 2017 11:04 pm
Location: Qld

Re: t s e barrels

#2 Postby GSells » Wed Aug 30, 2017 6:54 pm

Hi Bruce , I certain Gatton shooter did quite well with one in Qld teams this year and at the Nationals.
I've seen that barrel in action a 6.5 mm and yes it's quite accurate! Just keep the carbon under control!
Ps . Good to see you back on the Forum :D

bruce moulds
Posts: 2900
Joined: Sun Jun 19, 2005 4:07 pm

Re: t s e barrels

#3 Postby bruce moulds » Wed Aug 30, 2017 7:43 pm

hi graham,
thanks for the reply.
yes old dogs never die, they just smell that way.
how would you rate t s e compared to the better known american brands?
what i need is a 40 cal x about 32" long 12 or 13 twist, so choices are limited.
keep safe,
bruce.
"SUCH IS LIFE" Edward Kelly 11 nov 1880

http://youtu.be/YRaRCCZjdTM

GSells
Posts: 798
Joined: Sun Aug 13, 2017 11:04 pm
Location: Qld

Re: t s e barrels

#4 Postby GSells » Wed Aug 30, 2017 8:13 pm

bruce moulds wrote:hi graham,
thanks for the reply.
yes old dogs never die, they just smell that way.
how would you rate t s e compared to the better known american brands?
what i need is a 40 cal x about 32" long 12 or 13 twist, so choices are limited.
keep safe,
bruce.

40 cal I haven't had much experience with , but sounds like fun lol! I would stick to local manufacturers, I've seen good barrels by all of the local manufacturers.
Now would I trade my 2 Barts and 6 Liljas for local barrels ? I would say the 7/08 and .284 Bart barrels would have to be the most accurate barrels I've seen !( once sorted !)

I've seen a younger J Reid Carve up f standard with a Maddco.308 barrel a few years back too!

I believe every barrel maker from time to time makes a Friday Arvo special that doesn't shoot!
I am convinced that a good barrel will shoot pretty much straight away if the tune if correct .
Just remembering Cam's passing ( nearly 2 yrs now ) .

I heard a story that he bought a number of Kriegers , chambered them , then shot them .
If they didn't shoot after Ten shots , they were put aside until he picked a couple of good ones that did .
I believe JM is still shooting one of those in her .284 , which is what was taken to Raton . Now had over 3000 rounds and still shoots extremely well ! But it will go one day ( we have plans to change it out soon we hopes) .

Look I don't you can go wrong with a TSE .
Regards Graham.

Norm
Posts: 837
Joined: Fri Jul 23, 2010 10:21 pm
Location: Gippsland, Victoria

Re: t s e barrels

#5 Postby Norm » Thu Aug 31, 2017 10:08 am

Bruce I have a .50 cal Chromolly barrel and it is very accurate so don't see why a .40 cal barrel would not be.

bruce moulds
Posts: 2900
Joined: Sun Jun 19, 2005 4:07 pm

Re: t s e barrels

#6 Postby bruce moulds » Thu Aug 31, 2017 6:47 pm

thanks norm.
50 cal sounds interesting.
keep safe,
bruce.
"SUCH IS LIFE" Edward Kelly 11 nov 1880

http://youtu.be/YRaRCCZjdTM

Bigtravoz
Posts: 293
Joined: Sat Apr 22, 2017 7:43 pm

Re: t s e barrels

#7 Postby Bigtravoz » Sun Sep 03, 2017 4:15 pm

TSE are what used to be MAB. Some swore by MAB barrels, others liked them, never heard anyone say they were bad. I priced a barrel through them recently and they seemed reasonably priced. All for keeping Aussie jobs.


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 32 guests