as per the title.
do you taper the flash hole or not ?
inside and or out.
is it beneficial ?
thoughts ?
sean
to taper the flash hole or not ?
Moderator: Mod
-
- Posts: 427
- Joined: Thu Sep 01, 2016 6:55 pm
-
- Posts: 2211
- Joined: Sun Sep 07, 2008 7:55 pm
- Location: Brisbane
Re: to taper the flash hole or not ?
Never seen a problem with the primer pocket side of a flash hole (some 375/2½ Bertram excepted) but there are occasions when it might be desirable to knock dags of punched flash holes on the inside of the case.
-
- Posts: 254
- Joined: Sat Mar 02, 2013 9:49 pm
- Location: Queensland
Re: to taper the flash hole or not ?
According to the latest from Bryan Litz, on Lapua brass don't touch the flash hole. Unify depth only.
-
- Posts: 934
- Joined: Thu Oct 20, 2005 12:46 am
- Location: Cowra NSW
Re: to taper the flash hole or not ?
Longranger wrote:According to the latest from Bryan Litz, on Lapua brass don't touch the flash hole. Unify depth only.
Norma brass should also be included with Lapua.
Keith H.