say proj =0.243 or 0.284 etc.
is chamber better reamed to 0.243 etc, or 0.244. for the job we are doing?
also for other cals?
bruce.
chamber reamer clearance on proj
Moderator: Mod
-
- Posts: 2900
- Joined: Sun Jun 19, 2005 4:07 pm
-
- Posts: 2323
- Joined: Sun Feb 12, 2006 7:23 pm
- Location: Singleton NSW
Is this measurement you are talking about the throat diameter? I know the throat on the 308 barrel you (Tony Z) took off my 308 must have had a very tight throat. If I didnt have much neck tension ,the tight thoat would push the bullet back in the case . For the first year I shot this chamber ,I thought the lands were .100" further back than they actualy were ,its just that the bullets stopped when they hit the very tight throat. When I gave one bullet an extra hard push ,it went in another .100" to the lands. As I use very little neck tension and use the lands to do the final seating (in my BR cases),would .001 or .0005 throat clearnace be better?
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 66 guests