Hi all
I'm on the hunt for some stainless tumbling media that is 1mm diameter X 12mm long or .040 X .500 in imperial.
Seems to be a good size that doesn't get stuck in cases
Stainless tumbling media
Moderator: Mod
-
- Posts: 89
- Joined: Sun Dec 28, 2014 11:30 am
-
- Posts: 891
- Joined: Mon May 19, 2014 7:11 pm
- Location: Townsville
Re: Stainless tumbling media
In my experience it's not so much the size as the way the ends are cut that cause the pins to get stuck.
The ones from aussiesaphire are sliced at an angle, which results in the ends having very sharp points. These get themselves wedged. Try ebay, you're looking for flat ends.
https://www.ebay.com.au/itm/32521255124 ... BM8LHb475g
The ones from aussiesaphire are sliced at an angle, which results in the ends having very sharp points. These get themselves wedged. Try ebay, you're looking for flat ends.
https://www.ebay.com.au/itm/32521255124 ... BM8LHb475g
-
- Posts: 119
- Joined: Thu Feb 26, 2015 12:12 am
Re: Stainless tumbling media
I bought this stuff back in 2014 15 as I needed so much of it cos I built my own sizeable Tumblr at the time was way cheaper than Aussie Sapphire
https://www.ebay.com.au/itm/181754745074
https://www.ebay.com.au/itm/181754745074
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 12 guests