GHARGEMASTER COMBO

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
SMITHTON
Posts: 127
Joined: Thu Jun 13, 2013 8:15 pm

GHARGEMASTER COMBO

#1 Postby SMITHTON » Mon Mar 18, 2019 12:08 pm

Unpacked my chargemaster an found it has American plug . Is it as simple as buying an adapter?

HamonetMM
Posts: 81
Joined: Fri Sep 22, 2017 9:00 pm

Re: GHARGEMASTER COMBO

#2 Postby HamonetMM » Mon Mar 18, 2019 12:22 pm

Check to make sure that the unit will accept 220-240 volts and not a 110volt ring in . If it is 240v just buy a power ponit adapter.

johno
Posts: 69
Joined: Sun Feb 04, 2018 11:07 pm

Re: GHARGEMASTER COMBO

#3 Postby johno » Mon Mar 18, 2019 12:23 pm

yes, nearly electrical store

SMITHTON
Posts: 127
Joined: Thu Jun 13, 2013 8:15 pm

Re: GHARGEMASTER COMBO

#4 Postby SMITHTON » Mon Mar 18, 2019 1:25 pm

The manual States: POWER SUPPLY (ADAPTER): INPUT: 100VAC-240VAC 50Hz/60Hz
Output 12VDC 1A

michaeljp
Posts: 110
Joined: Sun Jun 24, 2012 9:12 pm

Re: GHARGEMASTER COMBO

#5 Postby michaeljp » Mon Mar 18, 2019 3:12 pm

Take the power cord and instruction booklet to Jaycar an they will help you out.

6.5x55ai
Posts: 266
Joined: Mon Mar 18, 2013 4:21 pm
Location: Waikato NZ (Ex Tyabb)

Re: GHARGEMASTER COMBO

#6 Postby 6.5x55ai » Mon Mar 18, 2019 3:34 pm

SMITHTON wrote:The manual States: POWER SUPPLY (ADAPTER): INPUT: 100VAC-240VAC 50Hz/60Hz
Output 12VDC 1A

All you need is one of these https://www.jaycar.com.au/universal-inb ... s/p/PP4027
I have an older Chargemaster which has a wound 220v power supply and I had to source the same adaptor.
Yours would appear to be a more modern switched mode supply which will handle variable input voltage.
Should have bought the Chargemaster Lite :) - it comes with clipon adaptors for various worldwide power point configurations.
Last edited by 6.5x55ai on Mon Mar 18, 2019 3:36 pm, edited 1 time in total.

SMITHTON
Posts: 127
Joined: Thu Jun 13, 2013 8:15 pm

Re: GHARGEMASTER COMBO

#7 Postby SMITHTON » Mon Mar 18, 2019 3:35 pm

Ok thanks


Return to “Equipment & Technical”

Who is online

Users browsing this forum: Google [Bot] and 45 guests