Copperhead projectile approval?

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
lonerider43
Posts: 192
Joined: Thu Sep 01, 2016 6:55 pm

Re: Copperhead projectile approval?

#16 Postby lonerider43 » Sat Aug 11, 2018 5:32 pm

Ammunition components and powder need not be sourced solely from the NRAA

For F Open Division – Projectiles Allowed
Any weight or calibre of projectile provided it does not exceed 8 mm in diameter.

this is where i got confused i think.
Australian's Against "Gun-A-Phobia"

Ken Melgaard
Posts: 60
Joined: Fri Jul 01, 2005 7:32 pm
Location: West Wodonga, Vic

Re: Copperhead projectile approval?

#17 Postby Ken Melgaard » Tue Aug 14, 2018 7:27 pm

Yes.... the NRAA
Sent 500 of my 224 caliber 80 grain VLD to the NRAA about 7-8 years ago am still waiting for a response!! Dont know what ever happen to them or even if they bothered tested them.
I think the NRAA Board menbers are there to look after themselves, you only have to look at JLK bullets it was only the fact that Jan Dyer was on the board and Bob Dyer imported them that they got excepted a good example of the boards infuence on what the members use!!
Have no problems suppling bullets they just need to accepted “ Copperhead Bulletsl
Cheers
Ken Melgaard
Copperhead Bullets

KHGS
Posts: 598
Joined: Thu Oct 20, 2005 12:46 am
Location: Cowra NSW
Contact:

Re: Copperhead projectile approval?

#18 Postby KHGS » Tue Aug 14, 2018 10:29 pm

As the NRAA gunsmith at that time I tested & reported on these bullets along with the JLK bullets. My report recommended the approval of Ken's bullets on the basis of quality & being Australian made. I never had any response to my recommendation. Consequently the JLK's were approved .........for whatever reason!!!!
Keith H.

GSells
Posts: 268
Joined: Sun Aug 13, 2017 11:04 pm

Re: Copperhead projectile approval?

#19 Postby GSells » Thu Aug 16, 2018 7:52 pm

I’m looking forward to trying out Kens 7 mm pills ! With Berger stuffing us Aussie shooters around . It maybe a good time to support the local product .
I know Cam Mc used 103 in his dasher and I think Julie still does ! Apparently a new 180 gr pill is in the works that is close to the bergers .

Bart
Posts: 63
Joined: Wed Mar 14, 2007 4:31 pm
Location: Waikerie, South Australia

Re: Copperhead projectile approval?

#20 Postby Bart » Thu Aug 16, 2018 11:33 pm

Where can these be sourced from?
(6.5 140gr)?

disb
Posts: 29
Joined: Thu Jan 18, 2018 2:56 am

Re: Copperhead projectile approval?

#21 Postby disb » Thu Aug 16, 2018 11:43 pm

Bart wrote:Where can these be sourced from?
(6.5 140gr)?

http://copperheadbullets.com

Quick
Posts: 911
Joined: Fri Aug 15, 2008 9:09 pm
Location: Yanchep, Western Australia
Contact:

Re: Copperhead projectile approval?

#22 Postby Quick » Fri Aug 17, 2018 8:56 am

Im waiting on Ken to make his 208 VLDs for F/TR. Cant wait for them.
Shaun aka 'Quick'
Yanchep, Western Australia

308 Win F/TR & F-S
7mm F-Open Shooter.


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 3 guests