Model P Magnum bolt face
Moderator: Mod
-
- Posts: 573
- Joined: Wed Aug 08, 2012 3:43 pm
- Location: Brisbane, Australia
- Contact:
Model P Magnum bolt face
The new Barnard finally arrived.
I thought I'd take a photo of it before I disfigure it. Just to the left is the new case she is made to hold.
I thought I'd take a photo of it before I disfigure it. Just to the left is the new case she is made to hold.
Be careful what you aim for, you might hit it! Antipodean Industrial - Home of the G7L projectiles
-
- Posts: 1032
- Joined: Wed Nov 17, 2010 10:33 pm
- Location: Hamilton
- Contact:
-
- Posts: 573
- Joined: Wed Aug 08, 2012 3:43 pm
- Location: Brisbane, Australia
- Contact:
DannyS wrote:I like the Olivetti type writer, do you have it connected to your pc
Couldn't get to work with the PC, but it works a treat on a touchscreen tablet!
Be careful what you aim for, you might hit it! Antipodean Industrial - Home of the G7L projectiles
-
- Posts: 573
- Joined: Wed Aug 08, 2012 3:43 pm
- Location: Brisbane, Australia
- Contact:
RDavies wrote:What case is that, I cant make it out?
Good one Rod, pick out the most important part of the project in the photo! The other critical item is back with the die maker.
The cartridge designer missed the chance to see the cartridge fired, so all the performace aspects are purely calculated estimates. I want to get it right before publishing anything.
It has inspired my 8mm design for later this year/early next year, which I hope to register under the same proprietary name used by the cartridge designer.
Be careful what you aim for, you might hit it! Antipodean Industrial - Home of the G7L projectiles
-
- Posts: 573
- Joined: Wed Aug 08, 2012 3:43 pm
- Location: Brisbane, Australia
- Contact:
AlanF wrote:My measurements suggest a shortened 338 Lap case and and .270 (???) cal. Or maybe 7mm with a turned neck?
Alan
Close, you have ot allow for a bit of parallax.
Be careful what you aim for, you might hit it! Antipodean Industrial - Home of the G7L projectiles
-
- Posts: 7501
- Joined: Wed Jun 15, 2005 8:22 pm
- Location: Maffra, Vic
-
- Posts: 1136
- Joined: Fri Aug 15, 2008 9:09 pm
- Location: Yanchep, Western Australia
- Contact:
-
- Posts: 573
- Joined: Wed Aug 08, 2012 3:43 pm
- Location: Brisbane, Australia
- Contact:
25/60 SMc based on a WSM case.
Hopefully I can do the late By Smalley justice.
Hopefully I can do the late By Smalley justice.
Be careful what you aim for, you might hit it! Antipodean Industrial - Home of the G7L projectiles
-
- Posts: 573
- Joined: Wed Aug 08, 2012 3:43 pm
- Location: Brisbane, Australia
- Contact:
Correct. The 1:8" barrel should be able to stabalise something long.
Be careful what you aim for, you might hit it! Antipodean Industrial - Home of the G7L projectiles
Return to “Photos of Rifles etc.”
Who is online
Users browsing this forum: No registered users and 47 guests