Aussie made cleaning rods.

Suppliers - have a new product or service to announce? Shooters - have a question or suggestion for a Supplier?

Moderator: Mod

Message
Author
Sam Walker
Posts: 127
Joined: Thu Jan 26, 2006 3:19 pm
Location: South West of WA

Re: Aussie made cleaning rods.

#16 Postby Sam Walker » Sun Dec 25, 2016 10:15 am

Rapt with mine, was good luck that I happened to see this before I bought from a shop.
Sam

chrisw91
Posts: 101
Joined: Tue Oct 22, 2013 6:59 pm

Re: Aussie made cleaning rods.

#17 Postby chrisw91 » Fri Feb 03, 2017 9:13 am

Ok guys bit of an update. The anodiser is running about 6 weeks behind on all his work at the moment so I'm pretty much at a stand still until all the handles come back from him.

Sorry for all the delays.

SunnyCoast 5r
Posts: 202
Joined: Sun Oct 25, 2015 10:23 pm

Re: Aussie made cleaning rods.

#18 Postby SunnyCoast 5r » Sun Feb 19, 2017 5:56 pm

No worries. Still after one of each thanks mate. Do you need any cash up front? Thx

chrisw91
Posts: 101
Joined: Tue Oct 22, 2013 6:59 pm

Re: Aussie made cleaning rods.

#19 Postby chrisw91 » Mon May 08, 2017 2:20 pm

Hi bud these are still happening I was running behind with everything from prepping for the state teams events. The anodising that was done on the last lot was very poor quality and I won't be going back there again. The next lot and the rework ones will be going out this week to someone who can produce the finish I'm after.

Cheers
Chris

ajvanwyk
Posts: 439
Joined: Tue May 17, 2016 5:50 pm

Re: Aussie made cleaning rods.

#20 Postby ajvanwyk » Mon May 08, 2017 4:00 pm

Hey Chris,

Any chance you're able to make me a 7mm + in 54" ?

Albert
Albert
Rosedale Rifle Club
Australian Points Series

Bennyz
Posts: 10
Joined: Wed Feb 01, 2017 9:06 am
Location: SA

Re: Aussie made cleaning rods.

#21 Postby Bennyz » Tue May 09, 2017 8:38 am

Gday got to love aussie and local made
I'm interested in a price for a 22 +?
Cheers

Ben

chrisw91
Posts: 101
Joined: Tue Oct 22, 2013 6:59 pm

Re: Aussie made cleaning rods.

#22 Postby chrisw91 » Tue May 09, 2017 8:53 am

ajvanwyk wrote:Hey Chris,

Any chance you're able to make me a 7mm + in 54" ?

Albert


Hi Albert yes thy can be done.

Cheers

browniedog
Posts: 95
Joined: Mon Dec 15, 2014 6:43 am
Location: crows nest QLD

Re: Aussie made cleaning rods.

#23 Postby browniedog » Mon May 29, 2017 8:32 am

hi chris
have you any 6mm rod and 30 cal

Thanks
david

chrisw91
Posts: 101
Joined: Tue Oct 22, 2013 6:59 pm

Re: Aussie made cleaning rods.

#24 Postby chrisw91 » Sat Jul 01, 2017 12:07 pm

Ok guys sorry for the stuff around wth these. The last lot that went out to anodising just disappeared somewhere within the auspost system and they weren't insured so I had to cop that on the chin. I've managed to get another lot ready for anodising I'm just finishing another job to send them all at once. I've got a stint in hospital this month so I won't be doing a great deal but I hope to have them ready for august. Again sorry for all the delays for the guys that have waited so patiently.

Cheers
Chris

SunnyCoast 5r
Posts: 202
Joined: Sun Oct 25, 2015 10:23 pm

Re: Aussie made cleaning rods.

#25 Postby SunnyCoast 5r » Fri Sep 01, 2017 5:08 pm

Hey mate I hope you are going ok. Any more rods on the go?

Please ignore if you are still out with health probs.

Thx

chrisw91
Posts: 101
Joined: Tue Oct 22, 2013 6:59 pm

Re: Aussie made cleaning rods.

#26 Postby chrisw91 » Mon Sep 11, 2017 9:50 am

Ok all I've been like a ghost for the last few months with getting crook and all the recovery. I decided to outsource the handles before I had surgery so I could keep these moving forward. What a total f@ckup that was on my behalf. The company I used opened my drawings in a program that doesn't transfer the dimensions across so They made them up as they pleased and never let me know. 3 months of trying to get hold of these clowns after I found this out has been a total nightmare. They won't answer phone calls or email and when I went up to see them conveniently the manager "wasn't there" after I saw him walk off. I got everything back Friday and begun fixing them so they aligned with my drawings. I now have 142 handles ready for anodising.

If everyone that's still interested can send me a pm or reply here with calibers and the length you want I'll compile a list and get them made while the handles are away for anodising.

Cheers
Wardy
You do not have the required permissions to view the files attached to this post.

Dobbo
Posts: 40
Joined: Sat Jul 23, 2011 11:11 pm
Location: Sydney

Re: Aussie made cleaning rods.

#27 Postby Dobbo » Mon Sep 11, 2017 1:42 pm

Hi mate
I am after 1 x 6mm and 1 x 7mm

SunnyCoast 5r
Posts: 202
Joined: Sun Oct 25, 2015 10:23 pm

Re: Aussie made cleaning rods.

#28 Postby SunnyCoast 5r » Wed Sep 13, 2017 4:06 pm

Hi Wardy
I am after one for my 30' 308 and two for 26' 223 (1 for my brother).

Let me know how much and I will direct debit or call with card details.

Thx
Peter W

Plums
Posts: 1
Joined: Tue Jun 13, 2017 9:41 pm

Re: Aussie made cleaning rods.

#29 Postby Plums » Sat Oct 07, 2017 8:02 pm

I'd like a standard 44" long for a 308 please??

Message me the payment details....

chrisw91
Posts: 101
Joined: Tue Oct 22, 2013 6:59 pm

Re: Aussie made cleaning rods.

#30 Postby chrisw91 » Sat Oct 07, 2017 8:12 pm

Hi guys

The rods and spindles are all complete in just waiting on the handles to come back from anodising I'm hoping to have a confirmation Monday that they are complete and ready to be shipped back to me. I'll advise payment details once they are together and ready to go.


Cheers
Chris


Return to “Supplier News and Discussion”

Who is online

Users browsing this forum: No registered users and 5 guests