Fitting Rear Peep

If you shoot full-bore, then you're welcome to use this forum to discuss your sport.

Moderator: Mod

Message
Author
Acco
Posts: 7
Joined: Tue Sep 04, 2018 9:09 pm

Fitting Rear Peep

#1 Postby Acco » Wed Sep 12, 2018 8:01 pm

I Have a few questions on fitting a rear peep to a Lithgow LA 102 .308. As I don’t really want to drill the action is there any adapters to fit not a picatinny rail to suit “T MAC” sight adjuster. (Excuse my terminology as I am new to the seen.) Are there any other options to fit my rear peep that won’t cost a fortune? I was considering cutting down a heavily made scope ring and trying to get a mount plate brought or made, that will do the job bolted to the cut down scope ring. What are your thoughts please
You do not have the required permissions to view the files attached to this post.

scott/r
Posts: 559
Joined: Wed Aug 27, 2014 8:22 pm
Location: far north brisbane

Re: Fitting Rear Peep

#2 Postby scott/r » Thu Sep 13, 2018 1:36 pm

You'd probably be beter off selling the tmac and buying a top mount warner or an rpa sight. It'd work out cheaper as they just screw to your scope rail.
Have you had the barrel turned down to accept the front sight mount?
Scott.

Acco
Posts: 7
Joined: Tue Sep 04, 2018 9:09 pm

Re: Fitting Rear Peep

#3 Postby Acco » Mon Oct 01, 2018 6:13 pm

Thanks Scott, it is getting a new barrel shortly and will be configured to suit a front peep.
Not really in the situation to buy one off the net and hope for the best.


Return to “Full-bore/Target Rifle”

Who is online

Users browsing this forum: No registered users and 1 guest