musgrave 7.62 Q.
Moderator: Mod
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
musgrave 7.62 Q.
does anyone still use these rifles and can give me some info on the trigger set up ?
regards
sean.
regards
sean.
Australian's Against "Gun-A-Phobia"
-
- Posts: 254
- Joined: Sat Mar 02, 2013 9:49 pm
- Location: Queensland
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
Re: musgrave 7.62 Q.
i still need the info on the trigger.
i havent found anything on the net about them.
i havent found anything on the net about them.
Australian's Against "Gun-A-Phobia"
-
- Posts: 2
- Joined: Tue Aug 01, 2017 1:45 pm
Re: musgrave 7.62 Q.
have a look on ozgunsales.com Barry Cook has an after market trigger assembly for sale for Musgrave hope this helps
-
- Posts: 888
- Joined: Wed Aug 27, 2014 8:22 pm
- Location: far north brisbane
Re: musgrave 7.62 Q.
Are you chasing an aftermarket trigger or just trying to adjust the one you have?
Scott.
Scott.
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
Re: musgrave 7.62 Q.
the one i have is set to 1.5kg,id like to lighten to 1kg.
the triggers ive seen on the net dont look anything like mine.
some are close,but still not the same.
i could go aftermarket but i really dont want to unless this trigger has a problem.
the davies trigger needs to have the stock inletted to fit.
so..im on the hunt for info from those in the know ...
regards
sean.
the triggers ive seen on the net dont look anything like mine.
some are close,but still not the same.
i could go aftermarket but i really dont want to unless this trigger has a problem.
the davies trigger needs to have the stock inletted to fit.
so..im on the hunt for info from those in the know ...
regards
sean.
Australian's Against "Gun-A-Phobia"
-
- Posts: 1384
- Joined: Tue Aug 24, 2010 12:11 pm
Re: musgrave 7.62 Q.
My memory of the Musgrave trigger is that it was originally designed for around 1.5kg. That being so the spring was rather small and stiff --to stiff to get down to 1 kg and possible 1/2 kg ( shortly )
Not much you can do, as to really fix it a much lighter spring is required.
From memory there was not much room within the housing to fit a larger diameter lighter spring but having said that if you care to send the trigger to me ( Davies triggers ) I will give you an idea of what can be done --no obligation.
Barry Davies
Not much you can do, as to really fix it a much lighter spring is required.
From memory there was not much room within the housing to fit a larger diameter lighter spring but having said that if you care to send the trigger to me ( Davies triggers ) I will give you an idea of what can be done --no obligation.
Barry Davies
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
Re: musgrave 7.62 Q.
I've just found the Littleton stamp on the action.
The trigger is different from those I've seen.
which of the 3 adjusters is trigger pull ?
i suspect the one closest to the action is sear engagement ? yes ?
The trigger is different from those I've seen.
which of the 3 adjusters is trigger pull ?
i suspect the one closest to the action is sear engagement ? yes ?
You do not have the required permissions to view the files attached to this post.
Australian's Against "Gun-A-Phobia"
-
- Posts: 149
- Joined: Sat Apr 09, 2016 7:02 pm
- Location: north east victoria
Re: musgrave 7.62 Q.
hi Sean...take trigger out nd soak nd wash in 2 stroke...nd then blow it out with compressor...made mine really light doing it this way......Doug
-
- Posts: 1384
- Joined: Tue Aug 24, 2010 12:11 pm
Re: musgrave 7.62 Q.
Sean,
Rear screw is sear engagement.
Bottom front is overtravel.
Top front is pressure.
Barry
Rear screw is sear engagement.
Bottom front is overtravel.
Top front is pressure.
Barry
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
Re: musgrave 7.62 Q.
wouldnt be one of yours would it barry ?
btw,i have one of yours on my omark.
btw,i have one of yours on my omark.
Australian's Against "Gun-A-Phobia"
-
- Posts: 1384
- Joined: Tue Aug 24, 2010 12:11 pm
-
- Posts: 428
- Joined: Thu Sep 01, 2016 6:55 pm
Re: musgrave 7.62 Q.
ah kool.
thanks to your excellent tutorage i have set the trigger to an avg 1kg pull.
now ive got to do the omark [or leave it in the safe until the rule change]
i havent decided yet.
thanks to your excellent tutorage i have set the trigger to an avg 1kg pull.
now ive got to do the omark [or leave it in the safe until the rule change]
i havent decided yet.
Australian's Against "Gun-A-Phobia"
Return to “Full-bore/Target Rifle”
Who is online
Users browsing this forum: No registered users and 7 guests