Hey everyone
I have found some 147gn ELD-M and 143gn ELD-X to trial in my .260Rem.
I am seeking any experience people might have with loading for either of these projectiles and what powders people might have tried. My inclination is that 2209 would be appropriate and starting with loads advised for 142gn projectiles. Rifle is a 26” med Varmint in a KRG stock.
Just keen to get any advice
Cheers
Seeking Experience loading 143gn ELD-x & 147gn ELD-M in .260Rem
Moderator: Mod
-
- Posts: 92
- Joined: Fri Mar 24, 2017 9:58 am
- Location: ACT
-
- Posts: 125
- Joined: Thu Oct 20, 2016 3:02 pm
Re: Seeking Experience loading 143gn ELD-x & 147gn ELD-M in .260Rem
I have just finished testing the 162gn ELD-M 7mm, I loaded .010" & .005" jammed, .000" touch, thru to .005", .010", .015", .020", .025" .030" jumped and was surprised that a light .000" touch shot one hole groups at 100 yards. The group slowly started to open up at .005" jump and got larger as I reached .030" Jump.
Having shot Berger bullets at either .010" jam for VLD's and .010" jump for the Hybrids and .025" jump for the 183gn SMK's 7mm I was surprised to have the ELD-m just having a soft touch to the lands and shot a tight group.
I am not saying the 147 & 143 will be the same but don't over look the .000" touch when testing, I nearly did, I have probably shot over 1500 Berger 7mm 168gn VLD's thru two barrels and found them difficult to keep in tune and would only ever shoot at .010" jammed and were accurate enough but the ELD's are tighter and have a better BC than the Berger's.
Having shot Berger bullets at either .010" jam for VLD's and .010" jump for the Hybrids and .025" jump for the 183gn SMK's 7mm I was surprised to have the ELD-m just having a soft touch to the lands and shot a tight group.
I am not saying the 147 & 143 will be the same but don't over look the .000" touch when testing, I nearly did, I have probably shot over 1500 Berger 7mm 168gn VLD's thru two barrels and found them difficult to keep in tune and would only ever shoot at .010" jammed and were accurate enough but the ELD's are tighter and have a better BC than the Berger's.
-
- Posts: 145
- Joined: Fri Apr 29, 2016 6:38 pm
- Location: SYDNEY Australia
Re: Seeking Experience loading 143gn ELD-x & 147gn ELD-M in .260Rem
I know that all the testing that I have done with the 260rem, this is including three different rifles,,shooting 140gr nosler custom match projectiles NONE liked 2209, yet ALL loved 2213sc and all shot sub 1/2 moa , plus I am getting 2760fps with 2213sc
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 115 guests