Aussie made cleaning rods.
Moderator: Mod
-
- Posts: 127
- Joined: Thu Jan 26, 2006 3:19 pm
- Location: South West of WA
Re: Aussie made cleaning rods.
Rapt with mine, was good luck that I happened to see this before I bought from a shop.
Sam
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: Aussie made cleaning rods.
Ok guys bit of an update. The anodiser is running about 6 weeks behind on all his work at the moment so I'm pretty much at a stand still until all the handles come back from him.
Sorry for all the delays.
Sorry for all the delays.
-
- Posts: 202
- Joined: Sun Oct 25, 2015 10:23 pm
Re: Aussie made cleaning rods.
No worries. Still after one of each thanks mate. Do you need any cash up front? Thx
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: Aussie made cleaning rods.
Hi bud these are still happening I was running behind with everything from prepping for the state teams events. The anodising that was done on the last lot was very poor quality and I won't be going back there again. The next lot and the rework ones will be going out this week to someone who can produce the finish I'm after.
Cheers
Chris
Cheers
Chris
-
- Posts: 443
- Joined: Tue May 17, 2016 5:50 pm
Re: Aussie made cleaning rods.
Hey Chris,
Any chance you're able to make me a 7mm + in 54" ?
Albert
Any chance you're able to make me a 7mm + in 54" ?
Albert
Albert
Rosedale Rifle Club
Australian Points Series
Rosedale Rifle Club
Australian Points Series
-
- Posts: 10
- Joined: Wed Feb 01, 2017 9:06 am
- Location: SA
Re: Aussie made cleaning rods.
Gday got to love aussie and local made
I'm interested in a price for a 22 +?
Cheers
Ben
I'm interested in a price for a 22 +?
Cheers
Ben
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: Aussie made cleaning rods.
ajvanwyk wrote:Hey Chris,
Any chance you're able to make me a 7mm + in 54" ?
Albert
Hi Albert yes thy can be done.
Cheers
-
- Posts: 95
- Joined: Mon Dec 15, 2014 6:43 am
- Location: crows nest QLD
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: Aussie made cleaning rods.
Ok guys sorry for the stuff around wth these. The last lot that went out to anodising just disappeared somewhere within the auspost system and they weren't insured so I had to cop that on the chin. I've managed to get another lot ready for anodising I'm just finishing another job to send them all at once. I've got a stint in hospital this month so I won't be doing a great deal but I hope to have them ready for august. Again sorry for all the delays for the guys that have waited so patiently.
Cheers
Chris
Cheers
Chris
-
- Posts: 202
- Joined: Sun Oct 25, 2015 10:23 pm
Re: Aussie made cleaning rods.
Hey mate I hope you are going ok. Any more rods on the go?
Please ignore if you are still out with health probs.
Thx
Please ignore if you are still out with health probs.
Thx
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: Aussie made cleaning rods.
Ok all I've been like a ghost for the last few months with getting crook and all the recovery. I decided to outsource the handles before I had surgery so I could keep these moving forward. What a total f@ckup that was on my behalf. The company I used opened my drawings in a program that doesn't transfer the dimensions across so They made them up as they pleased and never let me know. 3 months of trying to get hold of these clowns after I found this out has been a total nightmare. They won't answer phone calls or email and when I went up to see them conveniently the manager "wasn't there" after I saw him walk off. I got everything back Friday and begun fixing them so they aligned with my drawings. I now have 142 handles ready for anodising.
If everyone that's still interested can send me a pm or reply here with calibers and the length you want I'll compile a list and get them made while the handles are away for anodising.
Cheers
Wardy
If everyone that's still interested can send me a pm or reply here with calibers and the length you want I'll compile a list and get them made while the handles are away for anodising.
Cheers
Wardy
You do not have the required permissions to view the files attached to this post.
-
- Posts: 40
- Joined: Sat Jul 23, 2011 11:11 pm
- Location: Sydney
-
- Posts: 202
- Joined: Sun Oct 25, 2015 10:23 pm
Re: Aussie made cleaning rods.
Hi Wardy
I am after one for my 30' 308 and two for 26' 223 (1 for my brother).
Let me know how much and I will direct debit or call with card details.
Thx
Peter W
I am after one for my 30' 308 and two for 26' 223 (1 for my brother).
Let me know how much and I will direct debit or call with card details.
Thx
Peter W
-
- Posts: 1
- Joined: Tue Jun 13, 2017 9:41 pm
Re: Aussie made cleaning rods.
I'd like a standard 44" long for a 308 please??
Message me the payment details....
Message me the payment details....
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: Aussie made cleaning rods.
Hi guys
The rods and spindles are all complete in just waiting on the handles to come back from anodising I'm hoping to have a confirmation Monday that they are complete and ready to be shipped back to me. I'll advise payment details once they are together and ready to go.
Cheers
Chris
The rods and spindles are all complete in just waiting on the handles to come back from anodising I'm hoping to have a confirmation Monday that they are complete and ready to be shipped back to me. I'll advise payment details once they are together and ready to go.
Cheers
Chris
Return to “Supplier News and Discussion”
Who is online
Users browsing this forum: No registered users and 18 guests