Search found 18 matches

by Kakaduthunder
Mon Jun 19, 2017 11:23 am
Forum: For Sale/Wanted to Buy
Topic: WTB 260 rem 30 degree reamer
Replies: 2
Views: 174

Re: WTB 260 rem 30 degree reamer

Someone is selling a 6.5slr reamer and dies on usedguns at the moment. It is not 260 improved but it is a very similar end product with a longer neck. Same parent case and about the same effort forming cases as well. Might be worth considering.
by Kakaduthunder
Wed Dec 07, 2016 7:00 pm
Forum: Equipment & Technical
Topic: Lyman gen 6 powder thrower
Replies: 1
Views: 513

Lyman gen 6 powder thrower

I am thinking about buying a Lyman gen 6 powder thrower. I know then can be accurate but what I am really interested in hearing is how reliable they are from someone who has owned one for a while. I have used a borrowed charge master extensively and it works well but is not without it's flaws. Reali...
by Kakaduthunder
Tue Oct 18, 2016 10:10 am
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Keith you are correct the rifle will get used primarily for tactical matches at 500m. After looking at the components last night I get the feeling the extra case capacity gained from the AI is going to get chewed up as I have to seat the projectile rather deep. I don't think the very slight advantag...
by Kakaduthunder
Mon Oct 17, 2016 9:31 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Hey Graham the cases turned up today as well as hornady 162 Elds. Thankyou very much for that. You weren't kidding they were cooked! I Have taken some measurements and it appears my measurements closely match yours. There is very little difference between the elds and the Bergers. With the .170 free...
by Kakaduthunder
Sun Oct 09, 2016 10:24 am
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

You mentioned before 308 lap brass for $88. I have previously paid that much but can't find prices quite that low at the moment. Where do you get yours?
by Kakaduthunder
Sat Oct 08, 2016 11:38 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

I can feel myself getting drawn down the wild cat rabbit hole. How many firings are you getting from cases? I currently don't anneal because I am not set up for it.
by Kakaduthunder
Sat Oct 08, 2016 12:09 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Plumbs I have read your pages. I know you are stuck on the AI version and I understand why, but I am not yet sold and I think I may just run with standard 7-08. I have never had to fire form but I suppose it is not that big of a deal. From above post I am not sure, do you run any AI specific dies? I...
by Kakaduthunder
Sat Oct 08, 2016 11:46 am
Forum: Equipment & Technical
Topic: Making bedding V Blocks
Replies: 3
Views: 870

Re: Making bedding V Blocks

Wilson, I have made several that were incorporated into chassis I built. One for a Barnard and one for are ingrown 700. As I don't have cnc the easiest way to make the v is to step cut with a regular end mill then use a 45 degree chamfer cutter. I even noticed that Bunnings sells nice Sutton ones. Y...
by Kakaduthunder
Sat Oct 08, 2016 12:00 am
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Plumbs just re-reading your last post, I would have thought you would have got slightly more velocity then stated with a 30 inch barrel. Accuracy is king but do other powders give a bit more velocity? It really only matters if I go down south to compete, which I have been asked to do, as they someti...
by Kakaduthunder
Fri Oct 07, 2016 11:51 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Clever, I like what you have done with the case. The only thing that could throw that slightly off is the neck tension you are running on your die. Maybe it was a fired case? A 7mm projie will engage the lands at a diameter of . 282. With a 7-08 reamer at 0.170 free bore ( which ptg have recommended...
by Kakaduthunder
Fri Oct 07, 2016 10:41 am
Forum: Equipment & Technical
Topic: Lab scales
Replies: 4
Views: 949

Re: Lab scales

Whoops I though I was replying to an existing post. Does sound like a crazy admission.
by Kakaduthunder
Thu Oct 06, 2016 9:23 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Thanks Graham. You couldn't by any chance take a measurement from the base of the case to the ogive when you get the chance. Free bore length is what I am looking for. Am I correct that they are Berger 168 vlds?
by Kakaduthunder
Thu Oct 06, 2016 4:06 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

Oh and no ruger Prescion rifles in the Nt due to the stock. At least not yet anyways.
by Kakaduthunder
Thu Oct 06, 2016 4:04 pm
Forum: Equipment & Technical
Topic: 7mm 08
Replies: 24
Views: 2342

Re: 7mm 08

I hear you on the 6.5 options but I didn't win a 6.5 mm barrel. I am kinda limited on funds so this barrel will be going on my existing Remington short action in left hand. I considered the 7 x47 but after forming and neck turning for my .284 I want my brass prep to be as follows: 1 Take shiny new b...
by Kakaduthunder
Thu Oct 06, 2016 11:19 am
Forum: Equipment & Technical
Topic: Lab scales
Replies: 4
Views: 949

Lab scales

I use a sartorius lab scale. It will measure 1 kernel. I throw under with a manual thrower then trickle up. I really don't know if it makes a difference but I am kinda anal. The scales are so sensative you can't have a fan on and breathing in their direction changes the reading.

Go to advanced search