Search found 71 matches

by argh
Sun Jan 20, 2019 7:56 am
Forum: General Forum
Topic: Electronic targets and new range designs
Replies: 4
Views: 122

Re: Electronic targets and new range designs

Unless you are about to spend the big dollars to remove the target gallery, mantlet, etc, or are providing a brand new ranges somewhere, there would be no point modifying your setup. And like in Scotts North Arm example, leaving the components in place gives redundancy. We often shoot military bolt/...
by argh
Fri Jan 11, 2019 10:36 am
Forum: Equipment & Technical
Topic: Abrasive cleaners and copper fouling
Replies: 31
Views: 1186

Re: Abrasive cleaners and copper fouling

Thanks for the comments Frank. I do remember the death of the barrel with abrasive on a brush, and have been as careful not to replicate. I apply paste with a patch on jag only (no brush) only doing a couple of patches, and only every 500 to 600 rounds. It really does appear from my experience bring...
by argh
Wed Jan 09, 2019 6:46 am
Forum: Equipment & Technical
Topic: Abrasive cleaners and copper fouling
Replies: 31
Views: 1186

Re: Abrasive cleaners and copper fouling

Just to clarify, maybe I should call it copper trace rather than fouling, and is not at all bad, just noticeably more than prior to pasting. (And less than my last barrel) I only ran two Iosso patches down the barrel (6 or so passes each patch) so dont really think I overdid it, and am as always awa...
by argh
Tue Jan 08, 2019 7:59 pm
Forum: Equipment & Technical
Topic: Abrasive cleaners and copper fouling
Replies: 31
Views: 1186

Re: Abrasive cleaners and copper fouling

Thanks Gyro, some interesting comments on that thread, and pretty well what I have heard before. I have always used abrasives very sparingly, and only every few hundred rounds to get rid of carbon buildup. What I did find interestingly was the change in the amount of copper being removed, and obviou...
by argh
Mon Jan 07, 2019 6:13 pm
Forum: Equipment & Technical
Topic: Abrasive cleaners and copper fouling
Replies: 31
Views: 1186

Re: Abrasive cleaners and copper fouling

Any abrasive paste ( even the finest ) will put micro scratches on the barrel, which in turn pick up copper. Solution--don't use abrasive paste --except in a case of " have to " ie a badly fouled barrel. I would have have thought that either button or cut rifeling would have put deeper sc...
by argh
Mon Jan 07, 2019 4:55 pm
Forum: Equipment & Technical
Topic: Abrasive cleaners and copper fouling
Replies: 31
Views: 1186

Abrasive cleaners and copper fouling

Last year I got a new rifle/barrel and was pleasantly surprised at how little copper fouling it experienced. My old Madco barrel used to give me a heap of blue patches with boretech eliminator, but would eventually clean up (was approaching 5,000 rounds), and was still shooting well. The new barrel ...
by argh
Mon Dec 31, 2018 7:15 am
Forum: Equipment & Technical
Topic: How to hit the bullseye at 900 yd?
Replies: 56
Views: 1826

Re: How to hit the bullseye at 900 yd?

Hopefully there are some knowledgeable people at your new club that ate willing to do some coaching for new shooters. Gear setup is a big part of consistent scores, as you have said .. holding the gun. That part will come with practice and getting your rifle setup correctly (some good fclass specifi...
by argh
Sat Nov 24, 2018 6:58 am
Forum: General Forum
Topic: NRAA Ammo Survey.
Replies: 39
Views: 2798

Re: NRAA Ammo Survey.

It seems like its a survey slanted at a justification for increasing fees. As has been said by others, with the increase in FOpen, and people buying projectiles direct from the manufacturer or from other retail outlets, the NRAA are not making any money on their bullet tax like they used to. They ha...
by argh
Sun Oct 28, 2018 8:39 pm
Forum: Full-bore/Target Rifle
Topic: Caldwell BR Front Rest Bag
Replies: 4
Views: 1086

Re: Caldwell BR Front Rest Bag

Protektor make bags to fit straight onto the caldwell rests, had one before I upgraded to joystick, works perfectly. See BRT , listed as "Protektor caldwell front bag" pretty hard to miss
by argh
Wed Oct 24, 2018 4:47 pm
Forum: Events
Topic: Gosford OPM - Sunday 21st October
Replies: 7
Views: 2280

Re: Gosford OPM - Sunday 21st October

Thanks Sean, was good to catch up with you.

Cheers
Adrian
by argh
Fri Oct 19, 2018 7:48 pm
Forum: Events
Topic: Gosford OPM - Sunday 21st October
Replies: 7
Views: 2280

Re: Gosford OPM - Sunday 21st October

It was the early fog last year that got me.

As Andrew said, normal conditions for a Gosford OPM so Man up :)
We will be putting all the covers up from tomorrow so come for a practice on Saturday (1pm on) if you want to dial your sights in first. Normal Club shoot conditions

Cheers
Adrian
by argh
Tue Oct 09, 2018 6:54 pm
Forum: Events
Topic: Gosford OPM - Sunday 21st October
Replies: 7
Views: 2280

Gosford OPM - Sunday 21st October

Hi All Its that time again, the Gosford OPM is in a few weeks. As in all last years, we run 3 x 500m ranges (2+10, 2+10, 2+15) to avoid having to shift gear up the ranges, and enable us to get through all the ranges as quickly as we can. We will be shooting under covers on a synthetic grass mound (n...
by argh
Wed Oct 03, 2018 7:55 pm
Forum: For Sale/Wanted to Buy
Topic: SOLD 6 Dasher Dies
Replies: 4
Views: 646

Re: 6 Dasher Dies

PM inbound
by argh
Tue Oct 02, 2018 8:17 pm
Forum: Equipment & Technical
Topic: Tall Gun Safe
Replies: 3
Views: 686

Re: Tall Gun Safe

You will find that the ammo box in the top of most safes are only a tack welded piece of sheet steel. A lump hammer and a cold chisel quickly converts a safe with an ammo box into a "long" safe with no ammo box. Recently changing rifle from a 28" barrel to a 30" barrel meant I ha...
by argh
Sat Sep 29, 2018 6:36 am
Forum: Equipment & Technical
Topic: 155gr bullet choice for 1:13 twist
Replies: 14
Views: 1628

Re: 155gr bullet choice for 1:13 twist

We have had a few guys here with 12 twist fail miserably with hybrids. The Berger VLD would be a good option along with the HBC. Both are a good price too.

Go to advanced search