As per the title

I have grown fond of the Leupold 45x competition scopes
Seeing if anyone would like to swap one for one of my sightron 10-50x60 target dot scopes
Scopes have the additional 3” sunshades and are in great condition

700 triggers drop in although you have to remove the safety if it has one .

You may need to get your file out on the bolt dependent if it is a square or angle model .
Whilst at it you set the timing

Both very easy

Charge masters ect are fine although I would still weigh each charge on some dependable beam scales . By accident I discovered lee plastic throwers are the best . I bought a harrel at the same time 2 second hand lee’s . Harrel is good for Ppc powder but won’t meter 2208 for shit Lee on the other han...

Interesting about the helmar

The manufacturer is about 10 mins from home

I will check it out

Got any fresh 6br brass to swap ?

Where are you located?

I have 100 new Lapua cases

In regards to that beaut ultrasonic cleaner you built where did you source the parts ?
Or more specifically is there a special frequency or product I should be looking at ?

Thanks for the feed back so far Metho would be a cheaper option than methanol and much more accessible. I am in uncharted waters and don’t have much of a knowledge of chemistry. I know what works which is a solid starting point . Alternative product suggestions are appreciated. This project is not a...

No I’m not sure

But I’m sure acetone and methanol do

Gday Everyone After following Keith hills advice i saw on a post on here I have been successfully cleaning my barrels with nulon engine cleaner . So far this has been my most successful product and i have tried many . Recently I decided to read the can to learn the ingredients consist of mostly acet...

Great post and some tasty rifles

Wish I could get my wife to come along

Some years ago I made one for mine A round aluminium disk with a single ball bearing sunk and glued into the disk. I also made a spacer to cover the exposed threads as I chose to not shorten the rear screw . It made a good improvement although it was still the stiffest action I have had to open . I ...

Not sure if the rock br uses the same bags as the Caldwell fire control? I used a seb front bag to replace my fire controls front bag some time ago . The rest is too narrow to keep the side tensioners but was a major improvement over the stock Caldwell bag . Fitting required a couple of holes punche...

Consider the bedding block as pillars and epoxy bed it

Getting enough adjustment will be your biggest challenge .
I use sports match hight adjustable (about $80 on eBay from the uk)

They will give you up to 50 moa dependant on how you set them up